
The AirTAC B52-GFR Copper-Free Air Treatment Unit B52-GFR30015MJC1WK is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/2" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR30015MJC1WK is a combined filter regulator with a built-in reverse (check) valve: it strips water and particulate from compressed air and holds a stable downstream pressure, while the K option blocks backflow through the unit. This 300-size configuration uses a 1/2 in PT port, a manual drain on the PC bowl, a fine 5 um element, and an external round gauge with an MPa scale. Medium is compressed air only, maximum working pressure is 1.0 MPa (145 psi), and the manual-drain regulation range is 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part within the G series filter regulator family, which covers sizes 200 through 600 with ports from 1/8 in to 1 in, optional G (BSPP) or NPT threads, and gauge or no-gauge builds in the catalogue. Flow appears only as curves in the datasheet, so we confirm sizing figures on request.
| Model | Airtac B52-GFR Copper-Free Air Treatment Unit B52-GFR30015MJC1WK |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/2" · 5 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-15 (two-unit set) |
Regulates and filters the air feeding pneumatic clamping cylinders on a fixture or jig, with the reverse valve helping hold the circuit against backflow when upstream supply dips.
Prepares regulated, filtered air for pneumatic tool drops along an assembly plant's overhead ring main, with manual drain points aligned to shift-end checks and the check valve option guarding against reverse flow between branches.
Sits in the air-prep panel of an automated press or forming machine, delivering clean 5 um-filtered air at a stable setpoint to the machine's actuation circuit, with the MPa gauge giving a visible reference.
Choose the 300 size with 1/2 in PT port for mid-to-large supply lines; smaller 200 or larger 400/600 sizes cover other demand levels. The manual drain suits installations with routine maintenance rounds - automatic or differential-pressure drain is available if the bowl should empty itself. The 5 um (W) element filters finer than the 40 um standard. The K suffix fits a reverse (check) valve, useful where downstream pressure must not push back through the unit; omit K for a plain build. C1 adds an external round MPa gauge (square embedded, psi or bar scales, or no gauge are alternatives), and J means no mounting bracket. PT is the standard thread, with G and NPT as orderable options.
Because flow is published as curves, not a single rated number, share your line demand and we will confirm the datasheet figures and sizing before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC does not publish a single rated flow number for the GFR300 series; the figures are given as flow curves. Tell us your line pressure and consumption and we will pull the datasheet curve and confirm whether this 1/2 in size is correctly sized for your application on request.
The K suffix means this filter regulator is built with a reverse (check) valve, so downstream air cannot flow back through the unit. The same GFR300-15 configuration is available without the K if you do not need backflow protection - just order the code without the final K.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.