
The AirTAC GAC F.R.L. Unit GAC30010ALNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC30010ALNTK combines a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port serves a 1300 g assembly that uses a 40 um element and a PC bowl. Because the type code is L, the working pressure range is 0.15-0.4 MPa (20-58 psi). An automatic drain clears condensate from the 60 cc bowl without an operator.
The letter N after the port means no gauge is supplied, though a 1/8in connection remains available if you need to add one later. This specific configuration also includes a reverse-flow (reflux) valve, which the catalogue depicts as a separate pneumatic symbol on its own page. Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30010ALNTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds small pneumatic grippers on a light assembly jig where actuation force must stay below 0.4 MPa to avoid crushing delicate plastic housings.
Conditions supply air for laboratory dispensing robots, providing a steady low-pressure output and automatic condensate removal during long unattended test cycles.
Prepares air for low-pressure packaging machines that fold light cardboard, using the lubricator to oil the moving folding arms and extending their service life.
This assembly uses a PC bowl and a 40 um element, making it a standard choice for general machine air. If your line must remain completely oil-free, you should choose a filter-regulator instead, as this unit actively adds oil mist downstream. The automatic drain is ideal for wet lines or unattended stations. Because no gauge is included, the set pressure cannot be read without installing one in the 1/8in port. Should a component fail, you can order spares individually using GAF300-10, GAR300-10 and GAL300-10.
The L type tops out at 0.4 MPa, which is 44% of the 0.9 MPa ceiling offered by the standard version, so select this model only if your actuators strictly require low-pressure operation.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. It features a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g.
The A indicates an automatic drain, L is the lower-pressure type, N means no gauge is supplied, and K signifies that a reverse-flow (reflux) valve is fitted. The catalogue shows the reflux valve as a separate pneumatic symbol with details on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.