verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC30010ALNWT

The AirTAC GAC F.R.L. Unit GAC30010ALNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight1300 g
$87.46 $94.96Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-10 bowl, type and element option on one page All GAC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC30010ALNWT

Delivering cleaned, lubricated air at a highly restricted downstream pressure, the AirTAC GAC30010ALNWT is a three-part F.R.L. combination pairing a 5 um filter, regulator and lubricator on a single L-shape bracket. The 3/8in port serves the GAC300 body, which carries a 60 cc condensate bowl and a 98 cc oil reservoir. Because the type code is L, the regulating range stops at 0.15-0.4 MPa (20-58 psi), intentionally capping output for sensitive pneumatics.

An automatic drain clears the 60 cc bowl without an operator, while the 5 um element traps far finer particulate than the standard 40 um grade, suiting precision valve banks. No gauge is supplied, but the body taps a 1/8in connection if one is added later. The 1300 g assembly uses NPT threads, and the build order ensures oil mist enters the line downstream of the regulator seat.

Airtac GAC F.R.L. Unit GAC30010ALNWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC30010ALNWT
SeriesGAC300 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC30010ALNWT

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 3/8" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC30010ALNWT Is Used

science

Laboratory Gas Panels

Feeds low-pressure actuated valves and analysers requiring 5 um filtered, lubricated air without exceeding 0.4 MPa.

precision_manufacturing

Textile Spinning Frames

Conditions air for delicate tensioning cylinders where standard 0.9 MPa pressure would damage fragile yarn guides.

handyman

Pneumatic Pick-and-Place

Supplies fine-pitch grippers on electronics assembly lines, using the 3/8in port and 5 um filtration to protect small bores.

Is the Airtac GAC F.R.L. Unit GAC30010ALNWT the Right Air-Prep Unit?

Choose this specific configuration when a circuit demands very low operating pressures and exceptionally clean air, as the L type restricts output to 0.15-0.4 MPa (20-58 psi) and the W element drops filtration to 5 um. If the machinery might ever require standard 0.9 MPa pressure, this lower-pressure variant is the wrong part. The PC bowl, automatic drain, and absent gauge suit unattended stations where operators rarely inspect the air prep; add a 1/8in gauge if verifying the setpoint is necessary. Should a component fail, order the GAF300-10 filter, GAR300-10 regulator, or GAL300-10 lubricator individually rather than replacing the whole clamp assembly. Note that omitting the lubricator is required if the downstream line must remain oil-free. The 0.4 MPa ceiling is 44% of the Standard type's 0.9 MPa maximum.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC30010ALNWT FAQ

This unit regulates air from 0.15-0.4 MPa (20-58 psi) and carries a maximum pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 1300 g, and pairs a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32, and the catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet.

The N in the code means no gauge is supplied from the factory, leaving a 1/8in port open for you to add one if verifying the 0.15-0.4 MPa setpoint is necessary. The W denotes a 5 um element, which catches significantly finer particles than the default 40 um filter, making it ideal for precision instruments, though it will require more frequent replacement.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC30010ALNWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC30010ALNWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.