
The AirTAC GAC F.R.L. Unit GAC30010ALNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic machinery, this assembly integrates a filter, regulator and lubricator on a shared L-shape bracket. The 3/8in port routes supply through a 5 um element to capture fine particulates before the regulator sets a lower 0.15-0.4 MPa (20-58 psi) working pressure. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal mechanism.
This configuration carries an automatic drain that empties the 60 cc condensate bowl without operator intervention, making it well suited to unattended or high-moisture lines. No pressure gauge is supplied, but the body features a 1/8in gauge connection for adding instrumentation later. A reverse-flow (reflux) valve is fitted, which the catalogue illustrates as a separate pneumatic symbol with details on its own page. Replacement parts follow the GAF300-10, GAR300-10 and GAL300-10 coding to keep maintenance straightforward. Order code GAC30010ALNWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30010ALNWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional control valves in small assembly jigs where the 5 um element prevents particulate wear on internal spools.
Regulates low-pressure air for test fixtures requiring a stable 0.15-0.4 MPa output without delivering excessive force to delicate components.
Conditions air for small air-jet looms or tensioning cylinders, with the automatic drain clearing condensate during continuous operation.
Selecting this model means accepting the lower-pressure type ceiling, as the 0.4 MPa upper limit suits low-force actuation rather than general factory mains. The 5 um element provides finer filtration than the standard 40 um grade, trading slightly more frequent element service for better protection of precision valves. Since no gauge is included, the set pressure cannot be read without fitting one to the 1/8in port. If the downstream line must remain completely free of oil, omit the lubricator and choose a dedicated filter-regulator instead. Stepping up to the GAC400 body raises the plotted flow envelope to 6000 L/min at 0.7 MPa inlet and doubles the oil bowl to 185 cc, whereas this GAC300 plots to 3000 L/min. Choosing the L type limits the top setting to 44% of the 0.9 MPa standard ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, uses ISO VG 32 lubricant, and weighs 1300 g.
The K indicates that a reverse-flow (reflux) valve is attached to the unit. The catalogue shows this as a separate pneumatic symbol with details on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.