
The AirTAC GAC F.R.L. Unit GAC30010ALT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air, the AirTAC GAC30010ALT is a three-unit F.R.L. combination pre-plumbed on a single L-shape bracket. This assembly pairs a 40 um filter, a regulator and a lubricator in strict sequence so oil mist is introduced downstream of the regulator seat. The 3/8in port and 1300 g weight place it firmly in the mid-size class, suited to panel or frame mounting rather than tubing support.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. It carries a PC bowl and an automatic drain that empties the 60 cc condensate sump without operator input. A circular gauge is fitted, reading MPa/psi, allowing direct visual confirmation of the downstream setpoint.
| Model | Airtac GAC F.R.L. Unit GAC30010ALT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive bagging and sealing cylinders where actuation forces must stay below 0.4 MPa to prevent crushing delicate films.
Conditions supply air for precision laboratory dispensers and low-force clamping jigs requiring a steady, oil-misted output.
Regulates pneumatic tensioners and yarn guides that rely on soft, low-pressure actuation to avoid snapping fine threads.
Choose this assembly when a machine requires stable actuation below 0.4 MPa, as the lower-pressure type tops out well below the 0.9 MPa standard ceiling. The 40 um element suits general pneumatic protection, while the automatic drain clears condensate from the 60 cc bowl unattended. If the downstream line must remain oil-free, omit the lubricator and select a filter-regulator instead. For maintenance, the individual units are separately orderable as GAF300-10, GAR300-10 and GAL300-10. Because the 0.4 MPa upper limit is 44% of the 0.9 MPa standard ceiling, never specify this L-type variant for systems that might later require higher actuation forces.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl alongside a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The A in the ordering code specifies an automatic drain, which evacuates condensate from the 60 cc sump as it accumulates without needing manual intervention. This is particularly useful for unattended installations or environments with high moisture generation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.