
The AirTAC GAC F.R.L. Unit GAC30010ALTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, the AirTAC GAC30010ALTK is a three-unit F.R.L. combination pre-plumbed on a single L-shape bracket. This specific assembly features a 3/8in port, a 40 um element, and a lower-pressure type regulation range of 0.15-0.4 MPa (20-58 psi). The build sequence routes air through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never gets fouled.
This configuration uses a PC bowl paired with an automatic drain that clears condensate without an operator, which is decisive for unattended or wet lines. A circular gauge is fitted to read the set pressure in MPa/psi for the default NPT thread. Additionally, the reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page.
| Model | Airtac GAC F.R.L. Unit GAC30010ALTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds carefully regulated, oil-misted air to delicate testing jigs where actuation forces must stay below 0.4 MPa to prevent crushing samples.
Conditions supply for pneumatic sealing bars and grippers on packaging lines that rely on gentle, low-pressure clamping to avoid deforming thin films.
Prepares air for small suction cups and linear slides in electronics assembly, ensuring the 40 um element protects tiny valves from particulate fouling.
Choose this 1300 g unit when a machine requires low-pressure actuation up to 0.4 MPa, as using it on an application that may ever need more will make it the wrong part. The 60 cc condensate bowl and 98 cc oil bowl dictate the service interval, meaning this body demands fewer interventions than a smaller GAC200 with its 25 cc drain capacity. If the downstream line must stay completely oil-free, you must omit the lubricator entirely and select a separate filter-regulator instead. The three constituent units are separately orderable as GAF300-10, GAR300-10 and GAL300-10, so a clogged element does not mean replacing the whole assembly. Because the lower-pressure type tops out at 0.4 MPa, it operates at about 44% of the Standard type's 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type unit regulates from 0.15-0.4 MPa (20-58 psi) and has a maximum pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 1300 g, features a 60 cc drain bowl and a 98 cc oil bowl, and recommends ISO VG 32 lubricant.
The K indicates that a reverse-flow (reflux) valve is attached to this specific F.R.L. combination. The catalogue draws this as a distinct pneumatic symbol; please consult its dedicated page for functional details, as our current data does not describe its internal operation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.