
The AirTAC GAC F.R.L. Unit GAC30010ALWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air, this AirTAC GAC30010ALWT F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port serves the GAC300 body, which pairs a 60 cc condensate bowl with a 98 cc oil reservoir. Because the 5 um element sits upstream of the pressure regulator, oil mist is added downstream to protect moving parts without fouling the regulator seat.
Configured for low-pressure duties, the unit regulates between 0.15-0.4 MPa (20-58 psi) and carries a fitted circular gauge scaled in MPa/psi for the default NPT thread. The automatic drain clears condensate without an operator, which is decisive for unattended or wet lines. If the machine may ever need more than 0.4 MPa, the L type is the wrong part.
| Model | Airtac GAC F.R.L. Unit GAC30010ALWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate actuator circuits on CNC fixturing where standard 0.9 MPa air would crush or distort fragile workpieces.
Conditions supply air for precision benchtop fluid dispensers and pneumatic stirrers requiring a stable 0.4 MPa maximum.
Protects small transfer gates and diverters in packaging lines by supplying finely filtered, lubricated air at low pressure.
Choose this assembly when a 3/8in line requires fine 5 um filtration and a low-pressure ceiling, stepping up from the GAC200 if you need more flow, as the GAC300 catalogue curve is plotted to 3000 L/min at 0.7 MPa inlet versus 1750 L/min for the smaller body. The PC bowl handles standard -5 to 70 C environments, while the automatic drain suits remote stations. If the downstream line must stay oil-free, choose a filter-regulator instead and omit the lubricator. Replacement parts share the 300-10 suffix: order GAF300-10, GAR300-10 and GAL300-10 individually. Note that the 0.4 MPa upper limit is 44% of the Standard type's 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 5 um, the drain bowl holds 60 cc, the oil bowl holds 98 cc, the unit weighs 1300 g, and the recommended lubricant is ISO VG 32.
The W code specifies a 5 um element that traps far finer particles than the standard 40 um grade, trading element service frequency for cleaner air suited to precision valves. The A code specifies an automatic drain that clears the 60 cc condensate bowl without an operator, ideal for unattended stations.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.