
The AirTAC GAC F.R.L. Unit GAC30010ALWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port GAC300 body carries a 60 cc condensate bowl and a 98 cc oil reservoir, while the 5 um element captures fine particulates for sensitive downstream valves. Because the lubricator sits last in the sequence, oil mist enters the airstream downstream of the regulator seat, preventing fouling.
This specific configuration carries an automatic drain to expel condensate without operator intervention and a fitted circular gauge reading MPa/psi for the default NPT thread. The reverse-flow (reflux) valve is fitted, shown in the catalogue as a separate pneumatic symbol with details on its own page. Operating pressure is set to the lower range of 0.15-0.4 MPa (20-58 psi), making it suitable for low-force actuator duties. Order code GAC30010ALWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30010ALWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds 3/8in lines to small grippers and low-pressure clamping cylinders where a 0.4 MPa ceiling protects delicate workpieces from crushing forces.
Conditions instrument air for sensitive test fixtures, relying on the 5 um element to protect fine needle valves and small flow controllers.
Keeps sorting diverters operating smoothly overnight, with the automatic drain emptying the 60 cc bowl without requiring a maintenance round.
Choose this 1300 g unit when a machine requires low-pressure actuation between 0.15-0.4 MPa (20-58 psi) alongside 5 um filtration. The automatic drain clears the 60 cc bowl unattended, which is decisive for wet lines or hard-to-reach installations. A fitted gauge allows direct pressure verification, while the NPT thread dictates an MPa/psi scale. If the downstream line must remain completely free of oil, the lubricator must be omitted and a separate filter-regulator chosen instead. Replacement spares follow the same 300-10 body-port suffix: GAF300-10, GAR300-10 and GAL300-10.
When sizing, note that the catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is 50% of the GAC400's 6000 L/min envelope. Because the lower-pressure type tops out at 0.4 MPa, it provides only 44% of the Standard type's 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 3/8in port, a 5 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The reverse-flow (reflux) valve is fitted to this unit, appearing as a separate pneumatic symbol in the catalogue. Additionally, the 5 um element traps far finer particles than the standard 40 um grade, providing cleaner air for precision valves at the cost of more frequent element service.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.