
The AirTAC GAC F.R.L. Unit GAC30010LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air, the AirTAC GAC30010LT is a three-unit F.R.L. combination built around a 3/8in port. This lower-pressure type regulates between 0.15-0.4 MPa (20-58 psi) and uses a 40 um element. The assembly integrates a filter, regulator and lubricator on a single L-shape bracket with quick clamps, eliminating inter-unit tubing and simplifying the install.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The unit carries a 60 cc condensate bowl and a 98 cc oil reservoir. A circular gauge is fitted, reading MPa/psi for the default NPT thread, allowing operators to monitor the set pressure directly.
| Model | Airtac GAC F.R.L. Unit GAC30010LT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate workholding on machining centers where a 0.4 MPa ceiling prevents crushing thin-walled aluminum or composite parts.
Conditions air for small-bore cylinders driving sealing jaws, ensuring consistent motion without over-pressurizing the lightweight mechanism.
Supplies regulated, lubricated air to benchtop analytical instruments and low-force agitators requiring a strictly capped 0.4 MPa supply.
Choose this 1300 g assembly for mid-range duties requiring a low-pressure ceiling, ensuring the machine never exceeds 0.4 MPa. It features a semi-auto and manual drain pair, venting condensate on pressure drop or on demand. If the downstream line must remain strictly oil-free, select a filter-regulator instead, as this unit actively adds oil mist. For maintenance, the three units are separately orderable as GAF300-10, GAR300-10 and GAL300-10. Stepping up to the GAC400 body increases the plotted flow envelope from 3000 L/min to 6000 L/min at 0.7 MPa inlet, doubling the capacity. Note that 0.4 MPa is 44% of the Standard type's 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl and a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The unit is fitted with both a semi-auto and a manual drain, allowing condensate to discharge on pressure drop or manually on demand. A circular gauge is included, and because the thread is NPT, the scale reads in MPa/psi.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.