
The AirTAC GAC F.R.L. Unit GAC30010LTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC30010LTK is a complete F.R.L. combination built around a 3/8in port. It pairs a 40 um filter, a regulator and a lubricator on a single L-shape bracket with quick mounting clamps. The lower-pressure type restricts the regulating range to 0.15-0.4 MPa (20-58 psi), making it suitable for sensitive actuators. A circular gauge reading MPa/psi is fitted for the default NPT thread, and the assembly includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The 1300 g mass needs a proper panel or frame mount rather than support from the tubing. Condensate is managed by both a semi-auto drain, which dumps on each pressure drop, and a manual drain for on-demand emptying into the 60 cc bowl. If a machine ever requires more than 0.4 MPa, this lower-pressure type is the wrong part.
| Model | Airtac GAC F.R.L. Unit GAC30010LTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeding small pneumatic grippers on an electronics assembly line where actuator force must stay below 0.4 MPa to avoid crushing delicate components.
Supplying stable, low-pressure air to laboratory gas valves and fluid handling systems that require a clean, regulated flow without high inlet force.
Controlling the low-pressure cylinders on a thin-film packaging machine, ensuring consistent tension and preventing tearing during the seal cycle.
Choose this 3/8in body when a duty point demands low-pressure regulation between 0.15 and 0.4 MPa rather than the standard 0.15-0.9 MPa range. The 40 um element handles general plant air, whereas a 5 um W variant is better for precision valves. The PC bowl is paired with a semi-auto and manual drain pair, but an automatic A version is available for unattended wet lines. Because the lubricator adds oil mist downstream, select a separate filter-regulator if the line must remain oil-free. The three units are separately orderable as GAF300-10, GAR300-10 and GAL300-10, so a clogged element does not require replacing the whole assembly. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is twice the 1750 L/min envelope of the smaller GAC200. Choosing this lower-pressure type means the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure model regulates from 0.15-0.4 MPa (20-58 psi) and has a max pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, uses a 40 um element, weighs 1300 g, holds 60 cc of condensate and 98 cc of oil, and requires ISO VG 32 lubricant.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue displays this as a distinct pneumatic symbol on its own page, and no specific operational details are provided in our data.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.