
The AirTAC GAC F.R.L. Unit GAC30010LWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC GAC30010LWT combines a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 5 um element to trap fine particles before they reach precision valves. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
This lower-pressure type regulates between 0.15-0.4 MPa (20-58 psi), making it suitable for sensitive actuators rather than high-force cylinders. A circular gauge is fitted, reading MPa/psi for the default NPT thread, so operators can verify the setpoint at a glance. The unit carries a 1300 g mass and uses a 60 cc condensate bowl paired with a 98 cc oil reservoir to set the maintenance interval.
| Model | Airtac GAC F.R.L. Unit GAC30010LWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to sensitive analytical instruments and fluid dispensing heads that require a stable 0.4 MPa maximum supply.
Conditions air for delicate tensioning cylinders and guide actuators, using the 5 um element to protect fine internal clearances from grit.
Supplies metered oil mist and regulated pressure to lightweight pick-and-place grippers that cannot tolerate full 0.9 MPa shop line pressure.
Choose this 3/8in body when a machine requires very fine 5 um filtration and a low-pressure ceiling of 0.4 MPa, stepping up from the GAC200 which offers a 1750 L/min flow envelope plotted at 0.7 MPa inlet compared to this body's 3000 L/min curve. The PC bowl is standard, and the semi-auto plus manual drain pair requires an operator to cycle the valve or rely on the pressure-drop release. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. The constituent parts are separately orderable as GAF300-10, GAR300-10 and GAL300-10. Note that 0.4 MPa is 44% of the 0.9 MPa ceiling offered by the standard type, so select this L-type only if the application will never demand higher pressure.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) against a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and pairs a 60 cc drain bowl with a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The W code specifies a 5 um element, which traps far finer particles than the standard 40 um grade, making it ideal for precision valves. The L type code limits the regulation ceiling to 0.4 MPa, ensuring the unit cannot accidentally over-pressurize delicate downstream actuators.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.