
The AirTAC GAC F.R.L. Unit GAC30010SNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, the GAC30010SNWTK is a three-unit F.R.L. combination pre-plumbed on a single L-shape bracket. This assembly routes air through a 5 um filter, a standard pressure regulator and a lubricator in strict sequence, adding oil mist downstream of the regulator seat to prevent fouling. It features a 3/8in port, a PC bowl, and operates at 0.15-0.9 MPa (20-130 psi).
Because the N follows the port code, no pressure gauge is supplied; a 1/8in gauge connection is available if you need to add one later to read the set pressure. The 5 um element traps far finer particles than the standard 40 um grade, suiting precision valve circuits, though it requires more frequent element service. This 1300 g unit carries a reverse-flow valve, shown as a separate pneumatic symbol in the catalogue, and relies on a semi-auto plus manual drain pair to clear its 60 cc condensate bowl. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC30010SNWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precision pneumatic tool changers where the 5 um element protects sensitive valve spools from fine particulate ingress.
Conditions air for high-speed packaging line cylinders, ensuring steady 0.15-0.9 MPa operation and adequate oil mist for moving seals.
Supplies diverting gate actuators on sorting conveyors, using the semi-auto drain to clear condensate during shift pressure drops.
Choose this GAC300 body for mid-scale duties where the catalogue flow curve is plotted to 3000 L/min at 0.7 MPa inlet, offering roughly double the envelope of the smaller GAC200 (1750 L/min). The semi-auto and manual drain pair fitted here dumps condensate on every pressure drop or on demand, contrasting with the automatic drain option found on other codes. If your downstream line must remain oil-free, omit the lubricator and choose a separate filter-regulator instead, as this unit actively adds oil mist. Replacement parts share the exact same body-port suffix: order GAF300-10, GAR300-10 and GAL300-10 individually rather than replacing the whole assembly. Stepping up to the GAC400 yields a 100 cc drain bowl, giving it about 1.7x the condensate capacity of this 60 cc bowl.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates between -5 to 70 C, weighs 1300 g, and uses a 60 cc drain bowl alongside a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The N positioned after the 3/8in port code indicates a gauge is omitted from the factory. The block retains a 1/8in gauge connection, allowing operators to install a NPT-threaded gauge reading MPa/psi if visual pressure verification is needed at the machine.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.