
The AirTAC GAC F.R.L. Unit GAC30010ST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, this AirTAC assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in ported body operates within the standard 0.15-0.9 MPa (20-130 psi) range, utilizing a 40 um element to capture solid particles before they reach downstream equipment.
Air flows through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never gets fouled. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac GAC F.R.L. Unit GAC30010ST |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Conditions air for pneumatic tool changers and actuated clamps on mid-sized CNC machining centers.
Supplies steady pressure and oil mist to the moving cylinders of automated case erecting and sealing lines.
Prepares drive air for high-speed pneumatic diverters routing packages along distribution conveyors.
Choose this 3/8in ported GAC300 when a smaller GAC200 with its 1/8in connection lacks the required flow capacity, but a heavier GAC400 is unnecessary. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, compared to the 1750 L/min envelope of the smaller GAC200. This model ships with both a semi-auto and manual drain, giving operators flexible condensate management for the 60 cc drain bowl. If your downstream line must remain strictly oil-free, omit the lubricator and select a dedicated filter-regulator instead. Replacement parts use the identical body and port suffix: GAF300-10, GAR300-10 and GAL300-10. Because the maximum supply is 1.0 MPa and the standard type regulates up to 0.9 MPa, there is only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi). It has a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The operating temperature is -5 to 70 C. The drain bowl holds 60 cc and the oil bowl holds 98 cc, with a total weight of 1300 g. The recommended lubricant is ISO VG 32.
This variant includes both a semi-auto drain, which dumps condensate on each pressure drop, and a manual drain for on-demand emptying. A circular gauge is fitted to the 1/8in connection, providing readings in MPa and psi to match the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.