
The AirTAC GAC F.R.L. Unit GAC300C10ALNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic machinery, this AirTAC GAC300C10ALNWT combines a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 5 um element to trap fine particles before they reach precision valves. Air flows through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The metal bowl equips this unit for rugged industrial settings.
Designed for low-pressure duties, the regulator operates within 0.15-0.4 MPa (20-58 psi) and an automatic drain clears condensate from the 60 cc bowl without an operator. No gauge is supplied, but a 1/8in connection allows adding one if needed. The assembly weighs 1300 g, and the three individual components (GAF300-10, GAR300-10, GAL300-10) remain separately orderable for maintenance. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C10ALNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument-quality 5 um filtered air to sensitive solenoid valve banks operating at low actuation pressures.
Conditions supply air for low-pressure test fixtures and analytical equipment requiring stable 0.15-0.4 MPa regulation.
Protects delicate air-jet loom nozzles by removing fine particulates and supplying a steady, lubricated low-pressure flow.
Choose this configuration when a machine requires highly filtered, low-pressure air with minimal maintenance intervention. The 5 um element offers superior protection for sensitive instrumentation compared to the standard 40 um grade, though it requires more frequent replacement. Because the type L regulator tops out at 0.4 MPa, verify your application never demands higher pressure, as exceeding this ceiling is impossible. The automatic drain is ideal for wet lines or unattended stations, while the metal bowl provides durability. If the downstream line must remain oil-free, omit the lubricator and select a filter-regulator instead. Spares follow the GAF300-10, GAR300-10 and GAL300-10 part numbers. Note that 0.4 MPa is 44% of the standard 0.9 MPa ceiling, quantifying exactly what pressure capacity is sacrificed for low-pressure control.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 3/8in port, a 5 um element, a 60 cc drain bowl and a 98 cc oil bowl. The temperature range is -5 to 70 C, the recommended lubricant is ISO VG 32, and the unit weighs 1300 g.
The N in the model code indicates no gauge is supplied. The regulator body features a 1/8in gauge connection, allowing you to install a compatible pressure gauge separately if you need to visually monitor the 0.15-0.4 MPa outlet setting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.