
The AirTAC GAC F.R.L. Unit GAC300C10ASNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
This GAC300C10ASNWTK is a three-unit F.R.L. combination-filter, regulator, and lubricator-pre-assembled on a single L-shaped bracket with quick mounting clamps. With a 3/8in port and a 1300 g mass, it suits medium-duty machine stations where a compact panel mount is preferred over tubing support. The metal bowl adds robustness for demanding shop environments, while the 5 um element traps finer particles than the standard 40 um grade.
The standard-type regulator holds outlet pressure from 0.15 to 0.9 MPa (20-130 psi), and the automatic drain clears condensate without an operator-ideal for lines that see intermittent use. No gauge is supplied, so the 1/8in gauge connection must be fitted if you need to read set pressure. The reverse-flow (reflux) valve is included, shown as a separate pneumatic symbol in the catalogue. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C10ASNWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feed a bank of precision pneumatic valves on a CNC fixture where the 5 um element protects fine internal passages from particulate wear.
Supply oil-misted air to a multi-spindle nutrunner on an automotive assembly line, with the automatic drain handling condensate from wet compressor air.
Condition air for a medium-duty milling machine's clamping system, where the metal bowl resists impact in a busy toolroom.
Choose this GAC300C10ASNWTK when you need a 3/8in F.R.L. with a metal bowl, automatic drain, and fine 5 um filtration for sensitive downstream valves. The no-gauge option keeps the package lean, but remember to add a gauge with a 1/8in connection if operators must verify set pressure. Spare parts follow the same body-port suffix: GAF300-10, GAR300-10, and GAL300-10 are separately orderable. Since the lubricator adds oil mist downstream, select a filter-regulator instead if your line must remain oil-free. The 5 um element will require more frequent service than a 40 um grade, so factor that into maintenance planning.
With a 1.0 MPa maximum supply and a 0.9 MPa top setting, you have only about 0.1 MPa of regulation headroom, so plan supply pressure near 1.0 MPa if you need the full 0.9 MPa output.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and it uses ISO VG 32 lubricant. The drain bowl holds 60 cc, the oil bowl 98 cc, and the unit weighs 1300 g.
The N after the port code means no gauge is supplied. If you need to read outlet pressure, you must add a gauge with a 1/8in connection, which is the standard size for the GAC300 body. The default NPT thread uses an MPa/psi scale.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.