
The AirTAC GAC F.R.L. Unit GAC300C10LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, lubricated air at a precisely controlled lower pressure, this AirTAC F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port routes air through a 5 um element to protect precision valves, while the metal bowl equips the unit for rugged industrial surroundings. Because the lubricator sits downstream of the regulator, oil mist is added last, ensuring the regulator seat never fouls.
Operating strictly within the 0.15-0.4 MPa (20-58 psi) lower-pressure range, it is built for systems requiring gentle actuation rather than high force. The assembly lacks a pressure gauge, leaving the 1/8in gauge port open for operators to add a compatible dial reading MPa/psi. Condensate is managed by a paired semi-auto and manual drain, emptying into a 60 cc bowl, and the 98 cc oil reservoir feeds the downstream mist lubrication. Order code GAC300C10LNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C10LNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to sensitive analytical instruments and glass actuators, where the 5 um element protects delicate components from particulate fouling.
Supplies gentle, regulated air to small picking heads and clamping cylinders that handle fragile consumer goods without crushing them.
Conditions air for low-force yarn guides and tensioning cylinders, adding a controlled oil mist to keep high-speed moving parts lubricated.
Choose this 1300 g GAC300 unit when a machine demands fine 5 um filtration and low-pressure regulation up to 0.4 MPa, stepping up from the GAC200 which offers a smaller 25 cc condensate bowl. The metal bowl suits harsher environments where standard PC might not be specified, and the semi-auto drain dumps condensate on every pressure drop. Since no gauge is supplied, the set pressure cannot be read without adding one to the 1/8in connection. If the downstream line must remain completely oil-free, omit the lubricator and choose a separate filter-regulator instead. For maintenance, the assembly accepts GAF300-10, GAR300-10 and GAL300-10 replacement units. Keep in mind that 0.4 MPa is 44% of the Standard type's 0.9 MPa ceiling, so verify your actuators do not ever need higher force.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type regulates from 0.15-0.4 MPa (20-58 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl alongside a 98 cc oil bowl. The recommended lubricant is ISO VG 32 or equivalent.
The N in the ordering code means no gauge is supplied, so you must install one on the 1/8in connection to read the set pressure. The W code specifies a 5 um element, which traps far finer particles than the standard 40 um filter, making it ideal for precision valves and instrument air, though it requires more frequent element service.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.