verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC300C10LNWTK

The AirTAC GAC F.R.L. Unit GAC300C10LNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialMetal
  • Drainsemi-auto + manual
  • Pressure gaugeNot fitted
  • Weight1300 g
$98.36 $105.86Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-10 bowl, type and element option on one page All GAC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC300C10LNWTK

Delivering cleaned, pressure-set and oil-misted air, this AirTAC GAC300C10LNWTK is a three-unit F.R.L. combination pairing a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. This specific assembly uses a 3/8in port, a 5 um element and a metal bowl, operating strictly within the lower pressure range of 0.15-0.4 MPa (20-58 psi). Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure-control mechanisms.

With no gauge supplied out of the box, operators must use the 1/8in gauge connection to add instrumentation if they need to visually verify the downstream setting. The unit carries a reverse-flow (reflux) valve, which the catalogue illustrates as a separate pneumatic symbol with full details on its own page. Condensate is managed by a paired semi-auto and manual drain system that empties the 60 cc bowl, while the 98 cc oil reservoir dictates the lubricant top-up interval. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC300C10LNWTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC300C10LNWTK
SeriesGAC300 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialMetal
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC300C10LNWTK

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/8" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 3/8" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC300C10LNWTK Is Used

precision_manufacturing

Precision Valve Banks

Feeds sensitive pneumatic logic circuits and low-friction valve manifolds where the 5 um element protects tight clearances from particulate damage.

package_2

Light-Force Clamping

Supplies regulated 0.4 MPa air to delicate packaging grippers that require gentle, consistent actuation force to avoid crushing thin-walled cartons.

science

Laboratory Actuators

Conditions air for low-pressure test fixtures and small-bore cylinders used in instrument air lines where exceeding 0.4 MPa would rupture components.

Is the Airtac GAC F.R.L. Unit GAC300C10LNWTK the Right Air-Prep Unit?

Choose this 1300 g assembly when a machine requires very stable low-pressure regulation rather than standard 0.9 MPa output, matching the 3/8in port to the GAC300 body's flow envelope plotted to 3000 L/min at 0.7 MPa inlet. The 5 um element traps far finer particulate than the standard 40 um grade, suiting precision valve banks but demanding more frequent element swaps. If the downstream line must remain completely oil-free, omit the lubricator and choose a dedicated filter-regulator instead. Maintenance is simplified because the three constituent parts are separately orderable as GAF300-10, GAR300-10 and GAL300-10.

Remember that the L type tops out at 0.4 MPa, which is exactly 44% of the Standard type's 0.9 MPa ceiling.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC300C10LNWTK FAQ

This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) and carries a maximum pressure of 1.0 MPa (145 psi) alongside a 1.5 MPa (215 psi) proof rating. It operates in temperatures from -5 to 70 C, uses a 60 cc condensate bowl and a 98 cc oil bowl, weighs 1300 g, and requires ISO VG 32 or equivalent lubricant.

The N in the ordering code means no gauge is supplied, so you must add one to the 1/8in connection to read the set pressure. Additionally, the K code indicates a reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC300C10LNWTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC300C10LNWTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.