verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC300C10LT

The AirTAC GAC F.R.L. Unit GAC300C10LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialMetal
  • Drainsemi-auto + manual
  • Pressure gaugeCircular, psi / bar
  • Weight1300 g
$92.89 $100.39Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-10 bowl, type and element option on one page All GAC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC300C10LT

Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300C10LT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 40 um element and a metal bowl, while the lower-pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). A circular gauge is fitted, reading MPa/psi for the default NPT thread.

Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The 60 cc condensate bowl and 98 cc oil reservoir dictate the maintenance rhythm, and the semi-auto plus manual drain pair clears water on every pressure drop or on demand.

Airtac GAC F.R.L. Unit GAC300C10LT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC300C10LT
SeriesGAC300 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialMetal
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC300C10LT

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
CBowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 3/8" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC300C10LT Is Used

straighten

Low-Force Grippers

Feeds small pneumatic grippers on an electronics assembly line where delicate handling requires a regulated pressure below 0.4 MPa.

science

Lab Analyzers

Conditions supply air for benchtop fluid analyzers, adding necessary oil mist for internal moving valves while trapping 40 um particulates.

handyman

Light Duty Jigs

Prepares air for low-pressure clamping jigs in woodworking, relying on the metal bowl to resist occasional shop floor impacts.

Is the Airtac GAC F.R.L. Unit GAC300C10LT the Right Air-Prep Unit?

Choose this 1300 g unit when a machine requires stable low-pressure actuation rather than the full 0.9 MPa standard range; if the application might ever need higher force, the L type is the wrong part. The metal bowl suits harsher industrial settings, and the fitted gauge lets operators verify the setpoint directly. Stepping up to a GAC400 brings a 100 cc drain bowl and a flow curve plotted to 6000 L/min at 0.7 MPa inlet, compared to the 3000 L/min envelope of this GAC300. If the line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares are GAF300-10, GAR300-10 and GAL300-10. Note that the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC300C10LT FAQ

It operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 40 um, and it uses a 60 cc drain bowl with a 98 cc oil bowl. Recommended lubricant is ISO VG 32, and the unit weighs 1300 g.

The L designates the lower-pressure range, capping the adjustment at 0.4 MPa instead of the standard 0.9 MPa. This makes it suitable for sensitive actuators, but it should not be specified if the equipment may later require higher operating forces.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC300C10LT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC300C10LT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.