
The AirTAC GAC F.R.L. Unit GAC300C10LTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC300C10LTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 40 um element, while the lower-pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). A circular gauge reading MPa/psi is fitted for the default NPT thread.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. This specific build carries a metal bowl and includes a reverse-flow (reflux) valve, which the catalogue illustrates as a separate pneumatic symbol on its own page. The 60 cc condensate sump and 98 cc oil reservoir dictate the maintenance rhythm for the 1300 g unit.
| Model | Airtac GAC F.R.L. Unit GAC300C10LTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds light-touch sealing jaws and date-stamp cylinders that rely on sub-0.4 MPa air to prevent crushing delicate carton flaps.
Conditions air for low-pressure air motors and screwdrivers on an assembly bench, adding the exact oil mist required for vane longevity.
Supplies steady, low-tension air to fabric spreading and guiding actuators where standard 0.9 MPa pressures would risk tearing materials.
Choose this 3/8in body if your duty point sits below the 0.4 MPa ceiling; if the machinery might ever require higher pressure, the L type is the wrong selection. The metal bowl suits harsher environments, though buyers must confirm chemical compatibility from the datasheet. The semi-auto and manual drain pair is fitted, and the 40 um element is standard. Because oil mist is introduced downstream, select a separate filter-regulator if the line must remain oil-free. Replacement spares share the 300-10 suffix: GAF300-10, GAR300-10 and GAL300-10. Stepping down to the GAC200 reduces the plotted flow envelope from 3000 L/min to 1750 L/min at 0.7 MPa inlet, whereas stepping up to the GAC400 doubles it to 6000 L/min. Keep in mind the 0.4 MPa upper limit is 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 3/8in port, a 40 um element, a 60 cc drain bowl and a 98 cc oil bowl. The unit weighs 1300 g, runs on ISO VG 32 lubricant, and functions across -5 to 70 C.
The K indicates that a reverse-flow (reflux) valve is attached. The catalogue shows this as a distinct pneumatic symbol with specific details on its own page, and it is included as an ordering difference on this particular assembly.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.