
The AirTAC GAC F.R.L. Unit GAC300C10SNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this GAC300C10SNTK combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 3/8in port routes air through a 40 um element, operating within a 0.15-0.9 MPa (20-130 psi) standard pressure range. Its metal bowl equips the unit for rugged plant environments.
Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling. This assembly omits the pressure gauge but retains a 1/8in gauge connection for adding one later. A reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300C10SNTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds pneumatic impact wrenches and actuators on a vehicle production track, using the metal bowl to withstand harsh shop floor conditions.
Supplies steady 0.9 MPa air with oil mist to continuous motion packaging equipment, keeping cylinder packings lubricated during high-speed runs.
Conditions air for high-speed pneumatic pushers on logistics conveyors, relying on the 60 cc condensate bowl to capture moisture from intermittent duty cycles.
The 1300 g mass of this GAC300 body requires a firm panel or frame mount rather than tubing support. It uses a semi-auto and manual drain pair, where the semi-auto dumps condensate on every pressure drop. If your line must remain oil-free, omit the lubricator and choose a dedicated filter-regulator instead. Replacement spares follow the body and port directly: GAF300-10, GAR300-10 and GAL300-10. Stepping down to the GAC200 halves the plotted flow envelope to 1750 L/min at 0.7 MPa inlet, whereas this 300 body traces to 3000 L/min. The 1.5 MPa (215 psi) proof pressure provides a 1.5x burst-test margin above the 1.0 MPa (145 psi) maximum, but this is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, uses ISO VG 32 lubricant, and weighs 1300 g.
The N in the ordering code indicates no gauge is supplied, so the set pressure cannot be read without adding one. The body features a 1/8in gauge connection, allowing you to install a compatible circular gauge reading in MPa/psi to match the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.