
The AirTAC GAC F.R.L. Unit GAC300C10SWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC GAC300C10SWT is a complete F.R.L. combination. A 3/8in port feeds the 5 um element, which captures far finer particulate than the 40 um standard to protect precision valves. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
The filter, regulator and lubricator arrive pre-plumbed on an L-shape bracket with quick mounting clamps, eliminating inter-unit tubing. Air passes through the filter first, then the regulator, with oil mist added last so the regulator seat never fouls. A robust metal bowl houses the 60 cc condensate drain and 98 cc oil reservoir, and the assembly weighs 1300 g.
| Model | Airtac GAC F.R.L. Unit GAC300C10SWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Supplies finely filtered 5 um air to precision pneumatic tool changers, ensuring regulator accuracy without particulate interference.
Conditions air for high-speed filling cylinders, providing steady 0.15-0.9 MPa pressure and downstream oil mist for moving seals.
Feeds a localized 3/8in distribution header on a plant floor, using the metal bowl to withstand occasional shop-floor impacts.
Choose this 1300 g GAC300 unit for mid-size duties where a 3/8in port is required; if a larger line is needed, stepping up to the GAC400 doubles the flow envelope to 6000 L/min at 0.7 MPa inlet and increases the drain bowl to 100 cc. This model uses a metal bowl rather than PC or nylon, making it a strong fit for harsher industrial surroundings, though compatibility with specific solvents should be confirmed. It carries the 5 um W element for instrument air, trading off a shorter element service interval for superior filtration. The semi-auto and manual drain pair is fitted, and if the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares are ordered individually as GAF300-10, GAR300-10 and GAL300-10. Because the 1.5 MPa proof pressure is a 1.5x margin over the 1.0 MPa maximum, it validates burst safety rather than permitting continuous operation above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The recommended lubricant is ISO VG 32.
The W code specifies a 5 um element instead of the standard 40 um, trapping finer particles for sensitive instrumentation at the cost of more frequent replacement. The C code denotes a metal bowl, chosen for environmental durability over standard PC or nylon, though chemical compatibility should be verified from the datasheet.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.