
The AirTAC GAC F.R.L. Unit GAC300N10ALNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air, this AirTAC GAC300N10ALNT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port routes air through a 40 um element, while the lower pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). A nylon bowl houses the automatic drain, which expels condensate without an operator present.
Because no gauge is supplied, the set pressure cannot be read unless a 1/8in gauge is added to the dedicated port. The 60 cc drain bowl and 98 cc oil reservoir dictate the maintenance rhythm for this 1300 g unit. Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat stays clean. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N10ALNT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds pneumatic sealing jaws on packaging lines that operate safely within the 0.15-0.4 MPa lower pressure band.
Conditions air for low-pressure diverter gates where the automatic drain handles condensate between shifts.
Prepares supply for delicate pneumatic actuators in laboratory equipment using the 40 um element and nylon bowl.
Choose this configuration for unattended lines requiring a strict 0.15-0.4 MPa (20-58 psi) ceiling, relying on the automatic drain to clear the 60 cc condensate bowl. If a machine might ever need more pressure, the L type is the wrong part. The nylon bowl suits general environments, though compatibility should be confirmed for aggressive surroundings. Since no gauge is fitted, operators must install one at the 1/8in connection to verify settings. If the downstream line must stay oil-free, select a filter-regulator instead of this lubricator-equipped assembly. Should the 40 um element clog or a bowl crack, order GAF300-10, GAR300-10 or GAL300-10 individually rather than replacing the whole bracket. Stepping up to the GAC400 body raises the plotted flow envelope to 6000 L/min at 0.7 MPa inlet, double the 3000 L/min envelope of this GAC300. Choosing the lower pressure type means the 0.4 MPa ceiling is 44% of the 0.9 MPa standard maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, the filtering grade is 40 um, and the recommended lubricant is ISO VG 32. It features a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g.
The N after the port code means no gauge is supplied from the factory. The body has a 1/8in gauge connection, so you can install your own circular gauge to read the set pressure. The default NPT thread corresponds to a MPa/psi scale if a gauge is added later.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.