verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC300 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC300N10ALT

The AirTAC GAC F.R.L. Unit GAC300N10ALT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialNylon
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight1300 g
$101.60 $109.10Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC300-10 bowl, type and element option on one page All GAC300-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC300N10ALT

Delivering cleaned, regulated and lubricated air, this AirTAC F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 3/8in ported GAC300 body carries a 40 um element, a fitted circular gauge reading MPa/psi, and a nylon bowl. Because the lubricator sits last in the flow path, oil mist is introduced downstream of the regulator seat, preventing fouling of internal components.

Configured for low-pressure duties, the regulator operates within a 0.15-0.4 MPa (20-58 psi) range. The automatic drain clears condensate from the 60 cc bowl without an operator, which is decisive for unattended or wet lines. At 1300 g, this unit requires a proper panel or frame mount rather than support from the tubing alone. Order code GAC300N10ALT has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC300N10ALT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC300N10ALT
SeriesGAC300 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialNylon
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl60 cc
Capacity of oil bowl98 cc
Recommended lubricantISO VG 32 or equivalent
Weight1300 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC300N10ALT

GAC300GA300 series F.R.L. unit — sets ports, bowl capacity and weight.
NBowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC300 · 3/8" · curve to 3000 L/min
One size downGAC200
One size upGAC400 (curve to 6000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC300N10ALT Is Used

precision_manufacturing

Low-Force Assembly Jigs

Feeds small pneumatic grippers and actuators on electronics assembly lines where operating pressures must stay below 0.4 MPa to prevent component damage.

package_2

Light-Duty Bagging Machines

Conditions air for delicate heat-sealing cylinders and forming heads in packaging equipment that rely on gentle, regulated actuation.

science

Laboratory Pneumatic Stations

Supplies clean, lubricated air at safe low pressures for benchtop fluid handling and test fixtures in research environments.

Is the Airtac GAC F.R.L. Unit GAC300N10ALT the Right Air-Prep Unit?

Choose this 3/8in model for machines needing a maximum 0.4 MPa output; if the application may ever require higher pressure, the standard type is the correct choice instead. The nylon bowl offers a lightweight alternative to the standard PC or metal options, though buyers should confirm compatibility with aggressive surroundings. The fitted gauge allows operators to read the set pressure directly, and the 40 um element suits general pneumatic protection. If the downstream line must stay oil-free, a filter-regulator should be chosen instead of this assembly. For maintenance, the three units are separately orderable as GAF300-10, GAR300-10 and GAL300-10. Stepping up to the GAC400 doubles the plotted flow envelope to 6000 L/min at 0.7 MPa inlet compared to the 3000 L/min curve of this body. Keep in mind that 0.4 MPa is about 44% of the standard type's 0.9 MPa ceiling.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 60 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 1300 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC300N10ALT FAQ

This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 3/8in port, a 40 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.

The automatic drain clears condensate from the bowl without manual intervention, making it ideal for unattended or wet lines. The nylon bowl provides a durable, lightweight housing alternative to the standard PC or metal bowls, though users should confirm its compatibility with specific operating environments.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC300N10ALT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC300N10ALT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.