
The AirTAC GAC F.R.L. Unit GAC300N10ALWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air, this AirTAC assembly integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. It features a 3/8in port, a 5 um element and a nylon bowl, operating within the lower pressure range of 0.15-0.4 MPa (20-58 psi). The pre-plumbed design eliminates inter-unit tubing, reducing potential leak paths during installation.
Air passes through the filter first, then the regulator, with oil mist added last so the regulator seat never fouls. Fitted with an automatic drain, the 60 cc condensate bowl empties without an operator, while the 98 cc oil reservoir sets the lubrication refill interval. A circular gauge reading MPa/psi is included for the default NPT thread, allowing direct pressure verification on the machine. Order code GAC300N10ALWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N10ALWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure instrument air to sensitive spool valves where the 5 um element prevents internal scoring and the 0.4 MPa ceiling protects delicate actuators.
Conditions air for small pick-and-place arms, relying on the automatic drain to clear condensate during long continuous shifts without operator intervention.
Supplies regulated, lubricated air to benchtop test fixtures, using the nylon bowl for visual flow checks and the fitted gauge to monitor the exact low-pressure setting.
Choose this GAC300 unit for duties requiring highly filtered air at low pressure, stepping up from the GAC200 which offers a 1750 L/min flow envelope versus this body's 3000 L/min plotted curve at 0.7 MPa inlet. The 5 um element traps far finer particles than the standard 40 um grade, suiting precision valves, though it requires more frequent element service. If the downstream line must remain completely oil-free, omit the lubricator and select a separate filter-regulator instead. Spares share the same body and port suffix: GAF300-10, GAR300-10 and GAL300-10. Note that the 0.4 MPa upper limit is 44% of the Standard type's 0.9 MPa ceiling, so if the machine may ever need higher pressure, this lower-pressure part is the wrong choice.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 5 um element, and weighs 1300 g. The drain bowl holds 60 cc, the oil bowl holds 98 cc, and the recommended lubricant is ISO VG 32.
The 5 um element captures fine particulates for precision pneumatics, trading off a shorter service life compared to the standard 40 um filter. The automatic drain actively ejects condensate from the 60 cc bowl on every cycle without manual intervention, making it ideal for unattended or wet air lines.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.