
The AirTAC GAC F.R.L. Unit GAC300N10ALWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air, this AirTAC assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port serves the GAC300 size class, which carries a 1300 g mass and a 60 cc condensate bowl. Because the 5 um element sits upstream of the pressure regulator, the internal seat stays clear of particulate fouling while the lubricator introduces oil mist downstream.
Configured for low-pressure duties, the unit regulates between 0.15-0.4 MPa (20-58 psi). The nylon bowl equips this specific variant, and the automatic drain empties condensate without an operator. A circular gauge is fitted to read the set pressure in MPa/psi, and the reverse-flow (reflux) valve is included as a separate pneumatic symbol detailed in the catalogue. Order code GAC300N10ALWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N10ALWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Ideal for delicate machining fixtures where standard 0.9 MPa air would crush thin-walled components, utilizing the 0.15-0.4 MPa range.
Feeds sensitive analytical instruments requiring 5 um filtered, lubricated air at stable, reduced pressures without manual drain intervention.
Supplies the 3/8in pneumatic cylinders on small form-fill-seal equipment, ensuring smooth operation via the 98 cc oil reservoir.
Choose this configuration for 3/8in lines that need precise low-pressure control and fine 5 um filtration. The nylon bowl keeps the assembly lighter, while the automatic drain suits unattended stations. If the machinery might eventually require pressure above 0.4 MPa, this lower-pressure type is the wrong part. The fitted gauge reads MPa/psi for the default NPT thread. Because the lubricator adds oil mist downstream, select a filter-regulator instead if the line must remain oil-free. Spares follow the body-port suffix exactly: GAF300-10, GAR300-10 and GAL300-10. Stepping up to the GAC400 body shifts the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, doubling the sizing capacity. Note that 0.4 MPa is 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates between -5 to 70 C, weighs 1300 g, and features a 60 cc drain bowl alongside a 98 cc oil bowl. The recommended lubricant is ISO VG 32.
The K indicates that a reverse-flow (reflux) valve is fitted. The catalogue illustrates this as a distinct pneumatic symbol with functional details provided on its own dedicated page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.