
The AirTAC GAC F.R.L. Unit GAC300N10ASNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. This GAC300N10ASNWT variant uses a 3/8in port and features a 5 um element, trapping far finer particles than the standard 40 um grade to protect precision valves. The standard pressure range is 0.15-0.9 MPa (20-130 psi).
The unit carries a nylon bowl and an automatic drain that clears condensate without an operator, which is decisive for unattended or wet lines. No gauge is supplied, but the body taps a 1/8in connection if you need to add one later. Air passes filter -> regulator -> lubricator, so oil mist is added downstream of the regulator seat. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N10ASNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds clean, lubricated air at a stable pressure to tool changer cylinders, where the 5 um element protects tight clearances from abrasive grit.
Conditions air for high-cycle sealing jaws and film feed clamps, with the automatic drain handling condensate during long continuous runs.
Supplies accurately regulated air to sensitive positioner slides and grippers, preventing particulate ingress into small-bore valve bodies.
Choose this 1300 g assembly for mid-size duties where instrumentation demands finer filtration; the 5 um element requires more frequent service than the 40 um default. Because the lubricator injects oil mist downstream, select a separate filter-regulator if the line must remain oil-free. The three units are separately orderable as GAF300-10, GAR300-10 and GAL300-10. Stepping down to the GAC200 halves the plotted flow envelope to 1750 L/min at 0.7 MPa inlet, whereas this GAC300 reaches 3000 L/min. Max supply is 1.0 MPa and the Standard type regulates to 0.9 MPa, leaving only about 0.1 MPa of headroom above the top setting.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 5 um element, and weighs 1300 g. The drain bowl holds 60 cc and the oil bowl holds 98 cc, requiring ISO VG 32 or equivalent lubricant.
No, the N in the code means no gauge is supplied. The body features a 1/8in gauge connection, so you can install a separate gauge reading MPa/psi for the default NPT thread to verify your downstream pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.