
The AirTAC GAC F.R.L. Unit GAC300N10ASTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, this AirTAC assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in ported GAC300 body operates at 0.15-0.9 MPa (20-130 psi) and uses a 40 um element to prepare supply for downstream pneumatics.
The nylon bowl equips this unit with an automatic drain, clearing condensate without an operator and holding 60 cc of liquid. A circular gauge reading MPa/psi is fitted for the default NPT thread, while the reverse-flow valve is included as a separate pneumatic symbol detailed in the catalogue. Order code GAC300N10ASTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N10ASTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Supplies stable, lubricated air to pneumatic tool change cylinders on machining centers.
Conditions air for high-speed packaging actuators where automatic condensate discharge prevents moisture ingress.
Prepares the main air supply for multi-station assembly lines fed by a 3/8in distribution pipe.
Choose this 1300 g combination when a mid-size 3/8in line requires unattended condensate management via the automatic drain. The 60 cc drain bowl and 98 cc oil sump dictate the maintenance interval, and the fitted gauge lets operators verify the 0.15-0.9 MPa setpoint directly. Because the lubricator introduces oil mist downstream of the regulator seat, select a filter-regulator instead if the application demands oil-free output. Should the element clog or bowl crack, order GAF300-10, GAR300-10 and GAL300-10 spares rather than replacing the whole assembly. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is exactly double the 1750 L/min envelope of the smaller GAC200, giving clear sizing headroom. With a 1.0 MPa maximum supply and a 0.9 MPa top setting, there is only about 0.1 MPa of regulation headroom above the highest output, so plan inlet pressure carefully if you need maximum delivery.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This model operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The recommended lubricant is ISO VG 32 or equivalent.
The K indicates that a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with specific details provided on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.