
The AirTAC GAC F.R.L. Unit GAC300N10ASWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for pneumatic systems, this AirTAC GAC300N10ASWTK combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. It features a 3/8in port, a standard pressure range of 0.15-0.9 MPa (20-130 psi) and a 5 um element. The build order matters: air passes through the filter first, then the regulator, and oil mist is added last so the oil never fouls the regulator seat.
This specific configuration uses a nylon bowl and an automatic drain that clears condensate without an operator, which is decisive for unattended or wet lines. A circular gauge is fitted, reading MPa/psi for the default NPT thread. The 60 cc drain bowl and 98 cc oil bowl dictate the service interval, and the reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue.
| Model | Airtac GAC F.R.L. Unit GAC300N10ASWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precision valves requiring fine 5 um filtration on automated tool change systems.
Conditions air for high-speed packaging actuators where the auto drain handles wet supply.
Supplies clean, regulated and lubricated air to instrument panels in test laboratories.
Choose this 1300 g GAC300 body for mid-size duties; its 3/8in port and 60 cc condensate bowl suit it to heavier work than the 750 g GAC200 with its 25 cc bowl, while remaining lighter than the 2390 g GAC400. The 5 um element traps far finer particles than the standard 40 um grade, making it ideal for precision valves or instrument air, though it requires more frequent element service. Because oil mist is added downstream, choose a filter-regulator instead if the line must stay oil-free. If a component fails, the three units are separately orderable as GAF300-10, GAR300-10 and GAL300-10. Stepping up to the GAC400 roughly doubles the flow envelope (plotted to 6000 L/min vs 3000 L/min at 0.7 MPa inlet), but the GAC300 offers a smaller footprint. The 1.5 MPa proof pressure against the 1.0 MPa maximum provides a 1.5x burst-test margin, not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 3/8in port, a 5 um element, a 60 cc drain bowl and a 98 cc oil bowl. The temperature range is -5 to 70 C, the weight is 1300 g, and the recommended lubricant is ISO VG 32.
The K indicates that a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with details on its own page. This model also includes the automatic drain and the 5 um fine filtration element.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.