
The AirTAC GAC F.R.L. Unit GAC300N10LNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC300N10LNTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a lower pressure operating band of 0.15-0.4 MPa (20-58 psi) and a standard 40 um element. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure-control mechanism.
Built with a nylon bowl, the unit carries a 60 cc condensate capacity and a 98 cc oil reservoir. No gauge is supplied, but a 1/8in connection is available if you need to add instrumentation later. The reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue, and the assembly weighs 1300 g. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N10LNTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate 3/8in pneumatic cylinders in testing rigs where output force must stay below 0.4 MPa to prevent specimen damage.
Regulates air for fabric guide rollers and low-tension clamping jaws that require a steady 20-58 psi supply alongside oil mist.
Conditions air for small pick-and-place units on a benchtop assembly line, using the 60 cc drain bowl to capture routine moisture.
Choose this 1300 g GAC300 body when a 3/8in line requires low-pressure regulation between 0.15-0.4 MPa (20-58 psi); if the machine may ever need more, the L type is the wrong part. The nylon bowl suits standard environments, while the semi-auto and manual drain pair gives dual condensate clearing options. Since no gauge is included, the set pressure cannot be read without adding one to the 1/8in port. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Spares follow the body-port suffix exactly: GAF300-10, GAR300-10 and GAL300-10. Note that 0.4 MPa is 44% of the Standard type's 0.9 MPa ceiling, capping the available output force for actuators.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It uses a 40 um element, has a 60 cc drain bowl and a 98 cc oil bowl, weighs 1300 g, runs from -5 to 70 C, and requires ISO VG 32 lubricant.
The N in the code means no gauge is supplied. The body features a 1/8in gauge connection, allowing you to install a separate NPT-threaded gauge reading MPa/psi if visual pressure monitoring is needed for your setup.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.