
The AirTAC GAC F.R.L. Unit GAC300N10LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 3/8in ported GAC300 body features a 5 um element for trapping finer particles, while the lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure-control mechanism.
Built with a nylon bowl, the unit relies on a semi-auto and manual drain pair to expel the 60 cc condensate sump. No gauge is supplied, though a 1/8in connection is provided if operators need to add instrumentation later. Weighing 1300 g, the assembly accepts GAF300-10, GAR300-10 and GAL300-10 replacement modules, meaning a clogged filter or damaged bowl does not force a full assembly swap. Order code GAC300N10LNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC300N10LNWT |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive solenoid valves in textile machinery where the 5 um element protects tight clearances and the low 0.4 MPa ceiling prevents diaphragm rupture.
Conditions air for low-force actuation in analytical instruments, providing stable sub-0.4 MPa pressure without risking delicate glass or plastic manifolds.
Supplies oil-misted air to small pick-and-place cylinders on electronics assembly lines, ensuring smooth actuator cycling at low operating pressures.
Choose this specific configuration when a machine requires highly filtered air at low pressures, as the 5 um element catches far finer particulates than the standard 40 um grade, benefiting precision valves. The lower-pressure type caps output at 0.4 MPa, making it unsuitable if the equipment might ever demand more. If a higher flow duty point is needed, stepping up to the GAC400 body shifts the plotted catalogue flow curve from 3000 L/min to 6000 L/min at 0.7 MPa inlet, while dropping to the GAC200 reduces the envelope to 1750 L/min. If the downstream line must remain completely oil-free, omit the lubricator and select a filter-regulator instead. Spares share the exact body-port suffix, ensuring the GAF300-10, GAR300-10 and GAL300-10 components drop straight in. Keep in mind that 0.4 MPa is about 44% of the Standard type's 0.9 MPa ceiling, so you sacrifice substantial upper range to gain finer low-pressure control.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. The unit weighs 1300 g, features a 60 cc condensate drain bowl and a 98 cc oil bowl, and uses a 5 um filter element.
The N in the ordering code indicates no gauge is supplied, but the body includes a 1/8in gauge connection so you can mount a compatible instrument if visual pressure monitoring is required. The nylon bowl provides a lightweight alternative to metal or PC, and the assembly uses a semi-auto and manual drain combination to clear the 60 cc sump.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.