
The AirTAC GAC F.R.L. Unit GAC300N10SWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, the AirTAC GAC300N10SWTK is a three-unit F.R.L. combination pre-assembled on a single L-shape bracket. This specific configuration pairs a 3/8in port with a standard pressure range of 0.15-0.9 MPa (20-130 psi) and a fine 5 um element. The nylon bowl equips this assembly, while a reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol with details on its own page.
Air passes through the filter, regulator and lubricator in that strict sequence, ensuring oil mist is added downstream so the regulator seat never fouls. The 5 um element traps far finer particles than the 40 um standard, making it ideal for precision valves, though it requires more frequent element service. A circular gauge is fitted, reading MPa/psi for the default NPT thread, allowing operators to monitor the set pressure directly.
| Model | Airtac GAC F.R.L. Unit GAC300N10SWTK |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF300-10 filter, GAR300-10 regulator, GAL300-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 3/8" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precision pneumatic tool changers where the 5 um element protects delicate gripper valves from fine particulate ingress on a 3/8in line.
Conditions air for packaging machinery, relying on the 60 cc drain bowl to capture moisture during extended production runs.
Supplies clean, regulated and lubricated air to test fixtures, utilizing the nylon bowl for visible fluid level checks without metal shattering risks.
Choose this 1300 g unit when your setup demands high filtration precision over a standard 3/8in line. The 60 cc condensate bowl and 98 cc oil bowl dictate the service interval, requiring fewer interventions than a smaller GAC200 body. It employs a semi-auto and manual drain pair, meaning the semi-auto dumps condensate on each pressure drop while the manual option clears it on demand. If the downstream line must remain oil-free, the lubricator here must be omitted and a separate filter-regulator chosen instead. Replacement spares follow the body-port suffix exactly: GAF300-10, GAR300-10 and GAL300-10. Stepping up to the GAC400 body roughly doubles the plotted flow envelope from 3000 to 6000 L/min at 0.7 MPa inlet, but the GAC300 holds a 2x flow advantage over the 1750 L/min curve of the GAC200.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It features a 3/8in port, a 5 um element, a 60 cc drain bowl, a 98 cc oil bowl, and weighs 1300 g. The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32.
The K indicates that a reverse-flow (reflux) valve is attached to this F.R.L. combination. The catalogue presents this component as a distinct pneumatic symbol, and specific functional details for the valve are located on their own dedicated page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.