verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC400 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC40010ALNTK

The AirTAC GAC F.R.L. Unit GAC40010ALNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade40 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight2390 g
$129.94 $137.44Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC400-10 bowl, type and element option on one page All GAC400-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC40010ALNTK

Delivering cleaned, regulated and lubricated air for mid-size pneumatic setups, this GAC400 unit combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 3/8in port pairs with a 2390 g body mass, requiring a firm panel or frame mount rather than tubing support. Because the 40 um filter sits first in the sequence, moisture and grit are stripped out before the air reaches the regulator, while the oil mist is injected last so it never fouls the internal regulator seat.

Configured for low-pressure duties, the regulator operates within a 0.15-0.4 MPa (20-58 psi) range. The automatic drain actively clears condensate from the 100 cc bowl without an operator, which is ideal for unattended or wet lines. No pressure gauge is supplied, but a 1/4in connection is ready if you need to add one. A reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue on its own page. Order code GAC40010ALNTK has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC40010ALNTK Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC40010ALNTK
SeriesGAC400 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade40 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
Capacity of oil bowl185 cc
Recommended lubricantISO VG 32 or equivalent
Weight2390 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC40010ALNTK

GAC400GA400 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/4" gauge connection.
(blank)Filtering grade 40 µm.
TNPT thread; gauge scale psi / bar.
KReverse-flow (reflux) valve attached.

Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC400 · 3/8" · curve to 6000 L/min
One size downGAC300
One size upGAC500 (curve to 7000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC40010ALNTK Is Used

package_2

Low-Pressure Packaging Lines

Feeds delicate bagging and sealing actuators where operating pressure must stay below 0.4 MPa to prevent crushing thin films.

handyman

Automated Assembly Jigs

Conditions air for multi-station pick-and-place units, using the 100 cc automatic drain to handle condensate during long unattended shifts.

science

Laboratory Pneumatic Tools

Supplies stable, lubricated air to benchtop dispensing robots and clamps without over-pressurizing sensitive glass or plastic fixtures.

Is the Airtac GAC F.R.L. Unit GAC40010ALNTK the Right Air-Prep Unit?

Choose this assembly when your machine needs a maximum of 0.4 MPa, as the lower-pressure type tops out well below the 0.9 MPa standard range. If the application must stay completely oil-free, you should select a filter-regulator instead, because the lubricator here intentionally adds oil mist downstream. The PC bowl carries the same 1.0 MPa maximum and -5 to 70 C temperature limits as the metal and nylon options, so confirm material compatibility for aggressive surroundings. Should a component fail, order the individual GAF400-10, GAR400-10 or GAL400-10 spares rather than replacing the whole set. Stepping up to this body gives a 6000 L/min plotted flow envelope at 0.7 MPa inlet, which is double the GAC300 capacity, but remember the 0.4 MPa ceiling is 44% of the standard type limit.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 2390 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC40010ALNTK FAQ

This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 2390 g, and pairs a 100 cc drain bowl with a 185 cc oil bowl using ISO VG 32 lubricant.

The N in the code means no gauge is supplied, leaving a 1/4in gauge port open for you to install one. You cannot read the set pressure without adding that gauge, and the default NPT thread dictates an MPa/psi scale if you order the AirTAC accessory.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC40010ALNTK

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC40010ALNTK and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.