verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC400 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC40010ALNWT

The AirTAC GAC F.R.L. Unit GAC40010ALNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeNot fitted
  • Weight2390 g
$119.04 $126.54Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC400-10 bowl, type and element option on one page All GAC400-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC40010ALNWT

Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC GAC40010ALNWT F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port serves mid-scale duties, while the 5 um element captures fine particulates for sensitive valves. Because oil mist is introduced downstream of the regulator seat, the internal mechanism avoids fouling. An automatic drain clears condensate from the 100 cc bowl without operator intervention.

This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi), making it suitable for low-force actuator circuits. No gauge is supplied, but the body features a 1/4in gauge connection if monitoring is added later. The 185 cc oil reservoir sets the lubrication service interval. At 2390 g, the assembly requires a solid panel or frame mount rather than tubing support. The catalogue flow curve for the GAC400 is plotted to 6000 L/min at 0.7 MPa inlet for sizing. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC40010ALNWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC40010ALNWT
SeriesGAC400 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
Capacity of oil bowl185 cc
Recommended lubricantISO VG 32 or equivalent
Weight2390 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC40010ALNWT

GAC400GA400 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/4" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC400 · 3/8" · curve to 6000 L/min
One size downGAC300
One size upGAC500 (curve to 7000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC40010ALNWT Is Used

precision_manufacturing

Precision Valve Arrays

Feeds low-pressure instrument air to sensitive solenoid valve manifolds, leveraging the 5 um element to prevent particulate sticking.

conveyor_belt

Light-Load Conveying

Conditions air for low-force pneumatic stoppers and diverter cylinders on packaging lines operating safely below 0.4 MPa.

science

Laboratory Pneumatics

Regulates delicate air pressure for test fixtures and small actuator rigs where the automatic drain prevents moisture ingress during unattended overnight runs.

Is the Airtac GAC F.R.L. Unit GAC40010ALNWT the Right Air-Prep Unit?

Choose this assembly for low-pressure circuits requiring fine filtration and unattended condensate management. The PC bowl handles standard plant environments, while the automatic drain suits wet lines. If a machine might ever exceed 0.4 MPa, the L type is the wrong part, as it caps at 0.15-0.4 MPa (20-58 psi). Because no gauge is included, the set pressure cannot be read without adding one to the 1/4in connection. For oil-free downstream requirements, omit the lubricator and choose a filter-regulator instead. Spares follow the body-port suffix: GAF400-10, GAR400-10 and GAL400-10. Stepping up to the GAC500 roughly doubles the plotted flow envelope to 7000 L/min at 0.7 MPa inlet. The lower-pressure ceiling of 0.4 MPa is about 44% of the Standard type's 0.9 MPa maximum.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 2390 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC40010ALNWT FAQ

This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 2390 g, and pairs a 100 cc condensate bowl with a 185 cc oil bowl. The recommended lubricant is ISO VG 32.

The N in the code indicates no gauge is supplied. The body retains a 1/4in gauge connection, allowing operators to install a separate NPT-threaded gauge reading MPa/psi to monitor the 0.15-0.4 MPa range.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC40010ALNWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC40010ALNWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.