
The AirTAC GAC F.R.L. Unit GAC40010ALNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. It features a 3/8in port, a 5 um element for fine particle retention, and operates across the lower 0.15-0.4 MPa (20-58 psi) pressure range. The automatic drain clears condensate without operator intervention, while the reverse-flow valve is fitted as indicated by the K code.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. Weighing 2390 g, this assembly requires a solid panel or frame mount rather than tubing support. The 100 cc condensate bowl and 185 cc oil reservoir dictate the maintenance interval, and no gauge is supplied, though a 1/4in connection is available if you need to add one later. Order code GAC40010ALNWTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40010ALNWTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional valves requiring 5 um filtration and stable low-pressure regulation within 0.15-0.4 MPa.
Conditions air for packaging line actuators, using the automatic drain to handle condensate during extended production runs.
Supplies metered oil mist and consistent low outlet pressure to delicate test fixtures and clamping cylinders.
Choose this configuration when a 3/8in line requires precise low-pressure control between 0.15-0.4 MPa (20-58 psi) and fine 5 um filtration for sensitive valves. The PC bowl is standard for typical industrial environments, while the automatic drain suits unattended or wet installations. Because the lubricator injects oil mist into the downstream air, select a separate filter-regulator instead if your actuators require an oil-free supply. Should the element clog or a bowl crack, you can order the constituent parts individually as GAF400-10, GAR400-10 and GAL400-10 rather than replacing the whole assembly. The catalogue flow curve for the GAC400 is plotted to 6000 L/min at 0.7 MPa inlet, which is exactly double the 3000 L/min envelope of the GAC300. Keep in mind that the 0.4 MPa ceiling is 44% of the standard 0.9 MPa limit, so if the machine may ever need higher pressure, this lower-pressure type is the wrong part.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It has a 3/8in port, a 100 cc drain bowl, a 185 cc oil bowl, weighs 2390 g, uses a 5 um element, and runs from -5 to 70 C using ISO VG 32 lubricant.
The N in the product code signifies that no gauge is supplied. The body features a 1/4in gauge connection, allowing you to install a compatible pressure indicator separately if you need to visually monitor the 0.15-0.4 MPa outlet setting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.