
The AirTAC GAC F.R.L. Unit GAC40010ALT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC40010ALT assembly integrates a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 3/8in ported body carries a 40 um element and a PC bowl, while the automatic drain clears condensate without an operator. Because the lubricator sits last in the sequence, oil mist is added downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
Configured for low-pressure duties, the L type governs output between 0.15-0.4 MPa (20-58 psi). A circular gauge is fitted, reading MPa/psi for the default NPT thread, so technicians can verify the setpoint directly. The 100 cc condensate sump and 185 cc oil reservoir set the maintenance interval for this 2390 g unit, and the three internal components are separately orderable as GAF400-10, GAR400-10 and GAL400-10 if only the element or bowl needs replacement.
| Model | Airtac GAC F.R.L. Unit GAC40010ALT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds delicate holding fixtures on CNC machining centers where standard 0.9 MPa air would deform thin-walled aluminum or composite workpieces.
Conditions air for sealing jaws and product diverters on flow-wrap machines that rely on gentle, regulated pressure to avoid crushing fragile consumer goods.
Supplies stable, low-pressure air to sensitive test benches and fluidic logic circuits that cannot tolerate the full force of a standard shop header.
Choose this 3/8in body when a machine requires a maximum of 0.4 MPa, as the L type explicitly tops out at that ceiling. If the application might ever need more pressure, the standard S type is the correct choice instead. The PC bowl suits general industrial environments, while the automatic drain is decisive for unattended or wet lines where manual emptying is impractical. Remember that oil mist is added downstream; choose a filter-regulator instead if the line must stay oil-free.
Relative to the GAC300, which plots a 3000 L/min envelope, the GAC400 curve extends to 6000 L/min at 0.7 MPa inlet, doubling the available sizing window. Finally, the 0.4 MPa upper limit is about 44% of the standard 0.9 MPa ceiling, quantifying exactly what is sacrificed to gain finer low-pressure control.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 100 cc drain bowl, a 185 cc oil bowl, weighs 2390 g, and uses ISO VG 32 lubricant.
The A in the ordering code specifies an automatic drain that expels condensate without requiring an operator to manually open a valve. This is particularly useful for the 100 cc bowl on unattended shifts, ensuring moisture is ejected automatically rather than accumulating and starving the air path.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.