verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC400 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC40010ALWT

The AirTAC GAC F.R.L. Unit GAC40010ALWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainautomatic
  • Pressure gaugeCircular, psi / bar
  • Weight2390 g
$124.51 $132.01Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC400-10 bowl, type and element option on one page All GAC400-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC40010ALWT

Delivering cleaned, lubricated and precisely metered air, the AirTAC GAC40010ALWT is a three-unit F.R.L. combination pairing a filter, regulator and lubricator on a single L-shape bracket. This specific assembly features a 3/8in port and utilizes a 5 um element to capture fine particulates for sensitive pneumatic logic. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of internal pressure-control components.

Configured for lower-pressure duties, the regulator operates within a 0.15-0.4 MPa (20-58 psi) range, while the automatic drain actively expels condensate from the 100 cc bowl without operator intervention. A circular gauge is fitted, reading MPa/psi for the default NPT thread, allowing operators to verify set pressure at a glance. The assembly weighs 2390 g, requiring a solid panel or frame mount rather than relying on downstream tubing for support.

Airtac GAC F.R.L. Unit GAC40010ALWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC40010ALWT
SeriesGAC400 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeAutomatic drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
Capacity of oil bowl185 cc
Recommended lubricantISO VG 32 or equivalent
Weight2390 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.

Model Code: Airtac GAC F.R.L. Unit GAC40010ALWT

GAC400GA400 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 10 = 3/8", 15 = 1/2".
ADrain: Automatic drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
(blank)Circular pressure gauge fitted.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC400 · 3/8" · curve to 6000 L/min
One size downGAC300
One size upGAC500 (curve to 7000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC40010ALWT Is Used

science

Laboratory Pneumatics

Feeds low-pressure actuator arrays and analytical instruments requiring a stable 0.4 MPa supply and finely filtered 5 um air to prevent clogging in delicate flow controllers.

package_2

Light Packaging Lines

Conditions air for low-force gripping and sealing cylinders where higher pressures would crush product, utilizing the automatic drain to handle condensate during continuous daily runs.

precision_manufacturing

Textile Machinery

Regulates air for sensitive spinning and weaving actuators that rely on a consistent 0.15-0.4 MPa range, while the lubricator ensures continuous oil mist for high-speed moving bushings.

Is the Airtac GAC F.R.L. Unit GAC40010ALWT the Right Air-Prep Unit?

Buyers should verify their machinery never demands more than 0.4 MPa, as this L-type unit cannot reach the 0.9 MPa ceiling of the standard S-type. If the application requires completely oil-free downstream air, this lubricator-equipped assembly must be omitted in favor of a dedicated filter-regulator. The 5 um W element provides finer filtration than the standard 40 um grade, ideal for protecting precision valves, though it requires more frequent element replacement. Should a component fail, the individual units are separately orderable as GAF400-10, GAR400-10 and GAL400-10.

When sizing, note the catalogue flow curve for the GAC400 is plotted to 6000 L/min at 0.7 MPa inlet, exactly double the 3000 L/min envelope of the smaller GAC300. Keep in mind that 0.4 MPa is about 44% of the 0.9 MPa standard ceiling.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 2390 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC40010ALWT FAQ

This lower-pressure F.R.L. combination operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The ambient and fluid temperature range is -5 to 70 C. It features a 100 cc drain bowl and a 185 cc oil bowl, weighs 2390 g, and requires ISO VG 32 or equivalent lubricant.

The A in the ordering code denotes the automatic drain, which clears condensate from the 100 cc PC bowl without manual intervention, making it suitable for unattended or wet lines. The W indicates a 5 um filtering element, offering finer particulate protection than the standard 40 um grade for precision valves, at the cost of more frequent element service.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC40010ALWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC40010ALWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.