
The AirTAC GAC F.R.L. Unit GAC40010ASNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatic systems, this AirTAC F.R.L. combination pre-assembles a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 3/8in port serves the GAC400 body, which pairs a 100 cc condensate bowl with a 185 cc oil reservoir. Air passes through the filter first, then the regulator sets a 0.15-0.9 MPa (20-130 psi) working pressure, and oil mist is injected last so it never fouls the regulator seat.
This specific configuration carries a 5 um element for trapping finer particles than the standard 40 um grade, making it better suited for protecting precision valves. Because the code contains an A, an automatic drain actively clears the 100 cc bowl without an operator. The N after the port means no gauge is supplied, though a 1/4in gauge connection is ready if you need to add instrumentation later. If the downstream line must remain oil-free, omit the lubricator and choose a separate filter-regulator instead. Order code GAC40010ASNWT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40010ASNWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds precision actuators on machining centers where the 5 um element prevents debris from clogging tight-tolerance tool changer cylinders.
Conditions air for high-speed packaging machinery, with the automatic drain expelling moisture continuously during long production runs.
Protects sensitive pilot valves on automated stamping presses by supplying finely filtered, steadily regulated oil mist to moving spools.
Choose this 2390 g unit when a 3/8in line requires high filtration and unattended condensate management. The 5 um element catches fine particulates that would jam close-tolerance actuators, while the automatic drain handles wet compressed air without manual intervention. Without a factory gauge, you must add your own to the 1/4in port to read the setpoint, and the default NPT thread dictates an MPa/psi scale. For maintenance, the assembly splits into GAF400-10, GAR400-10 and GAL400-10 spares. Stepping down to a GAC300 shrinks the plotted flow envelope to 3000 L/min at 0.7 MPa inlet, exactly half of this body's 6000 L/min curve, so the larger frame is decisive for higher demand. Furthermore, the 1.5 MPa proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, but it is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. The temperature range is -5 to 70 C, the drain bowl holds 100 cc, the oil bowl holds 185 cc, the unit weighs 2390 g, and the recommended lubricant is ISO VG 32.
The N in the ordering code indicates no gauge is supplied from the factory. The body features a 1/4in gauge connection, allowing you to install a compatible pressure indicator, which will read in MPa/psi due to the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.