
The AirTAC GAC F.R.L. Unit GAC40010LNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket. The 3/8in ported body carries a 40 um element and operates within the lower 0.15-0.4 MPa (20-58 psi) pressure band. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling of the pressure-control mechanism.
Weighing 2390 g, this assembly integrates a 100 cc condensate bowl and a 185 cc oil reservoir. The PC bowl ships with both semi-auto and manual drain options fitted, while the N suffix indicates no gauge is supplied; a 1/4in gauge connection is available if monitoring is added later. If the application requires oil-free exhaust, this lubricator must be omitted entirely in favor of a dedicated filter-regulator setup. Order code GAC40010LNT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40010LNT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds small-bore handling jaws on assembly lines where actuation force must stay below 0.4 MPa to avoid crushing delicate electronics.
Conditions drive air for packaging machinery that relies on soft-touch cylinders to form and seal lightweight cardboard boxes.
Regulates supply for pneumatic test benches requiring stable, low-pressure inputs to prevent damage to sensitive gauges and fixtures.
Choose this 3/8in model for low-pressure duties up to 0.4 MPa, stepping up from the GAC300 which offers a 3000 L/min plotted flow envelope at 0.7 MPa inlet compared to this body's 6000 L/min curve. The standard 40 um filtration suits general actuator lines, while the PC bowl matches the common -5 to 70 C temperature limits. Replacement spares follow the 400-10 suffix exactly: order GAF400-10, GAR400-10 and GAL400-10 individually if a bowl or element breaks.
Because the lower-pressure type tops out at 0.4 MPa, it reaches only 44% of the standard 0.9 MPa ceiling, making it the wrong choice if the machine might ever need higher operating force.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure F.R.L. combination regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, uses a 40 um element, weighs 2390 g, holds 100 cc of condensate and 185 cc of oil, and requires ISO VG 32 lubricant.
The N in the ordering code means no gauge is supplied from the factory. The body features a 1/4in gauge connection, so operators can install a compatible NPT-thread gauge reading in MPa/psi to monitor the 0.15-0.4 MPa setpoint.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.