verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GAC400 · F.R.L. Combination (Filter + Regulator + Lubricator)

Airtac GAC F.R.L. Unit GAC40010LNWT

The AirTAC GAC F.R.L. Unit GAC40010LNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).

  • TypeF.R.L. combination
  • Port size3/8"
  • Pressure range0.15 - 0.4 MPa (20 - 58 psi)
  • Filtering grade5 µm
  • Bowl materialPC
  • Drainsemi-auto + manual
  • Pressure gaugeNot fitted
  • Weight2390 g
$110.32 $117.82Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GAC400-10 bowl, type and element option on one page All GAC400-10 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac GAC F.R.L. Unit GAC40010LNWT

Delivering cleaned, lubricated air at a strictly controlled lower pressure, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port serves mid-scale pneumatics, while the 5 um element captures fine particulates for sensitive valves. Because the set pressure cannot be read without adding a gauge, the body leaves the factory with a 1/4in gauge connection ready for one to be fitted later.

Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The PC bowl pairs with a semi-auto and manual drain, holding 100 cc of condensate and 185 cc of oil. Operating strictly between 0.15-0.4 MPa (20-58 psi), it suits machinery requiring gentle actuation rather than full-line force. Order code GAC40010LNWT has NPT ports (the T in the code) for North American pipe fittings.

Airtac GAC F.R.L. Unit GAC40010LNWT Technical Specifications

ModelAirtac GAC F.R.L. Unit GAC40010LNWT
SeriesGAC400 F.R.L. combination
Port size3/8" (NPT thread)
Filtering grade5 µm
Pressure range0.15 - 0.4 MPa (20 - 58 psi)
TypeLower pressure
Bowl materialPC
Drain typeSemi-auto drain + manual drain
FluidAir
Max. pressure1.0 MPa (145 psi)
Proof pressure1.5 MPa (215 psi)
Temperature range-5 to +70 °C (unfreeze)
Capacity of drain bowl100 cc
Capacity of oil bowl185 cc
Recommended lubricantISO VG 32 or equivalent
Weight2390 g

Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.

Model Code: Airtac GAC F.R.L. Unit GAC40010LNWT

GAC400GA400 series F.R.L. unit — sets ports, bowl capacity and weight.
(blank)Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N).
10Port size 3/8". This body offers 10 = 3/8", 15 = 1/2".
(blank)Drain: Semi-auto drain + manual drain.
LLower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L).
NNo pressure gauge; 1/4" gauge connection.
WFiltering grade 5 µm.
TNPT thread; gauge scale psi / bar.
(blank)No reverse-flow valve.

Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.

Size Class & Flow Envelope

  • GAC2001/8"-1/4" · 1750 L/min
  • GAC3001/4"-1/2" · 3000 L/min
  • GAC4003/8"-1/2" · 6000 L/min
  • GAC5003/4" · 7000 L/min
  • GAC6003/4"-1" · 12000 L/min

Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.

This modelGAC400 · 3/8" · curve to 6000 L/min
One size downGAC300
One size upGAC500 (curve to 7000 L/min)
Build orderFilter → bracket → regulator → lubricator

Where the Airtac GAC F.R.L. Unit GAC40010LNWT Is Used

science

Laboratory Pneumatics

Feeds low-pressure air to sensitive analytical instruments and glassware handling actuators where a 5 um element prevents particulate contamination.

package_2

Thin-Film Sealing

Regulates gentle clamping forces on flow-wrapping machines, ensuring delicate film webs are not torn by excessive cylinder thrust.

precision_manufacturing

Textile Spinning

Supplies a steady, oil-misted air supply to low-friction yarn guides and small-bore cylinders operating well below standard line pressure.

Is the Airtac GAC F.R.L. Unit GAC40010LNWT the Right Air-Prep Unit?

Choose this 2390 g assembly for mid-capacity lines needing precision filtration and low-pressure regulation. The 5 um element protects delicate instrumentation but demands more frequent replacement than the standard 40 um mesh. A semi-auto drain dumps condensate on every pressure drop, supplemented by a manual override, while the PC bowl suits standard ambient environments. If the downstream line must remain completely oil-free, omit the lubricator and select a dedicated filter-regulator instead. Should a component fail, order the individual GAF400-10, GAR400-10 or GAL400-10 spares rather than replacing the whole bracket.

The 0.4 MPa upper limit is exactly 44% of the standard 0.9 MPa ceiling, so verify your actuators never require more force than this lower range permits.

Quick checklist

  • ✓ Body size for your peak flow (3/8" here)
  • ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
  • ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
  • ✓ Drain: semi-auto + manual, or automatic
  • ✓ Element 40 µm or 5 µm
  • ✓ Thread & gauge scale (PT / G / NPT)
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Fill the oil bowl with ISO VG 32 or equivalent only.
  • check Drain condensate before the 100 cc bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Support the 2390 g unit on its bracket, not on the tubing.

The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.

Airtac GAC F.R.L. Unit GAC40010LNWT FAQ

This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi), with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates between -5 to 70 C, weighs 2390 g, and features a 100 cc drain bowl alongside a 185 cc oil reservoir. The recommended lubricant is ISO VG 32.

The N in the ordering code signifies no gauge is supplied. The block retains a 1/4in gauge connection, allowing operators to install a compatible MPa/psi scale gauge matching the default NPT thread, ensuring the 0.15-0.4 MPa setpoint can be visually verified.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac GAC F.R.L. Unit GAC40010LNWT

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GAC40010LNWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.