
The AirTAC GAC F.R.L. Unit GAC40010LNWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, lubricated air at a precisely controlled lower pressure, the AirTAC GAC40010LNWTK is a three-unit F.R.L. combination built around a 3/8in port. This assembly pairs a 5 um filter, a regulator, and a lubricator on a single L-shape bracket with quick mounting clamps. Because the air passes through the filter first and the lubricator last, the oil mist is introduced downstream of the regulator seat, preventing fouling of the internal pressure springs.
Configured for low-pressure duties, this standard PC bowl model regulates between 0.15-0.4 MPa (20-58 psi) and carries a 5 um fine element for trapping smaller particulate matter. It ships without a gauge, but features a 1/4in gauge connection for adding instrumentation later. The 100 cc condensate bowl and 185 cc oil reservoir set the maintenance interval for this 2390 g unit, which must operate above -5 C to prevent freezing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40010LNWTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds sensitive directional control valves requiring 5 um filtered, low-pressure oil-misted air to prevent seat contamination and premature wear.
Conditions air for delicate gripping jaws and sealing actuators operating safely under 0.4 MPa, ensuring consistent bag sealing forces.
Prepares instrument air for low-force test rigs and analytical equipment, adding necessary lubrication for moving components without exceeding 58 psi.
Choose this 400-series unit when an application requires fine 5 um filtration and a strict low-pressure ceiling, rather than the 0.15-0.9 MPa range of standard types. It utilizes a semi-auto and manual drain pair, discharging condensate on pressure drops or on demand. The PC bowl is standard, and buyers needing aggressive chemical resistance should confirm compatibility from the datasheet. Since no gauge is supplied, the set pressure cannot be read without adding one to the 1/4in connection. If the downstream line must remain completely oil-free, omit the lubricator and choose a separate filter-regulator instead. Replacement spares follow the body and port exactly: GAF400-10, GAR400-10, and GAL400-10. This model includes a reverse-flow (reflux) valve, which the catalogue shows as a separate pneumatic symbol with details on its own page. Stepping up from a GAC300 roughly doubles the plotted flow envelope, moving from 3000 to 6000 L/min at 0.7 MPa inlet. By choosing this L type, the 0.4 MPa ceiling is 44% of the Standard type's 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It functions in temperatures from -5 to 70 C, uses a 100 cc drain bowl and a 185 cc oil bowl, weighs 2390 g, and requires ISO VG 32 lubricant.
The N in the code means no gauge is supplied, but a 1/4in connection allows adding one later to read the set pressure. The K indicates a reverse-flow (reflux) valve is fitted, shown as a separate pneumatic symbol in the catalogue, with details on its own page.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.