
The AirTAC GAC F.R.L. Unit GAC40010LT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for pneumatic machinery, this AirTAC assembly integrates a filter, regulator and lubricator on a single L-shape bracket. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Air passes through the filter first, then the regulator, with oil mist added last so the internal seat never fouls.
Configured for lower-pressure duties, the unit regulates between 0.15-0.4 MPa (20-58 psi) and carries a 2390 g mass that demands a proper frame mount rather than tubing support. The 100 cc condensate bowl and 185 cc oil reservoir set the maintenance interval, and the fitted semi-auto and manual drains allow flexible condensate management. Order code GAC40010LT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40010LT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds cushioned cylinders in flow-wrapping equipment where gentle product handling demands a strict 0.4 MPa ceiling.
Conditions supply air for sensitive analytical instruments and low-force actuators on benchtop testing rigs.
Regulates low-tension air for yarn guides and lightweight clamping fixtures in textile processing lines.
Choose this lower-pressure type for circuits operating strictly under 0.4 MPa; if the equipment might ever require a higher setting, the standard 0.15-0.9 MPa variant is the correct choice. The PC bowl suits general industrial environments, and the 40 um element balances particle capture with service life. Because oil mist is added downstream, select a separate filter-regulator if the line must remain oil-free. Replacement spares share the 400-10 suffix: GAF400-10, GAR400-10 and GAL400-10. The 0.4 MPa ceiling is 44% of the standard 0.9 MPa limit, firmly capping the available downstream force.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 100 cc drain bowl, a 185 cc oil bowl, a 40 um element, and weighs 2390 g. The recommended lubricant is ISO VG 32.
This model ships with both a semi-automatic and a manual drain fitted, allowing condensate to dump on pressure drop or on demand. A circular gauge is installed, reading in MPa and psi to match the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.