
The AirTAC GAC F.R.L. Unit GAC40010LTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for downstream pneumatics, this GAC40010LTK assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 40 um element, while the lower pressure type restricts the operating band to 0.15-0.4 MPa (20-58 psi). A circular gauge reading MPa/psi is fitted for the default NPT thread, and the reverse-flow (reflux) valve is included as a distinct ordering option shown as a separate pneumatic symbol in the catalogue.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. The 2390 g mass requires a firm panel or frame mount rather than tubing support. Condensate accumulates in the 100 cc drain bowl, and the 185 cc oil bowl dictates the lubricant top-up interval, using ISO VG 32 oil.
| Model | Airtac GAC F.R.L. Unit GAC40010LTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds light-touch pneumatic pick-and-place arms where actuation pressure must stay below 0.4 MPa to prevent component damage.
Conditions air for delicate bag-folding and sealing cylinders that rely on a regulated, oil-misted supply for smooth motion.
Prepares compressed air for low-pressure clamping fixtures and test rigs requiring stable, lubricated output within a narrow band.
Choose this 3/8in unit when a machine demands a strict 0.15-0.4 MPa ceiling rather than the standard 0.9 MPa upper limit. It carries a PC bowl and a semi-auto plus manual drain pair, discharging condensate on pressure drop or on demand. If the application requires oil-free output downstream, a filter-regulator must be selected instead, as this lubricator intentionally introduces oil mist. The fitted gauge reads in MPa/psi, and replacement spares share the exact same body-port suffix: GAF400-10, GAR400-10 and GAL400-10.
Stepping down to the GAC300 body drops the plotted flow envelope from 6000 L/min to 3000 L/min at 0.7 MPa inlet, halving the available capacity. Because this is the lower pressure type, its 0.4 MPa maximum is 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) and carries a maximum pressure of 1.0 MPa (145 psi) with a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 2390 g, and features a 100 cc drain bowl alongside a 185 cc oil bowl using ISO VG 32 lubricant. The catalogue flow curve is plotted to 6000 L/min at 0.7 MPa inlet.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue depicts this as a separate pneumatic symbol with details on its own page. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.