
The AirTAC GAC F.R.L. Unit GAC40010LWTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, lubricated and precisely set air for downstream pneumatics, this AirTAC GAC40010LWTK is a three-unit F.R.L. combination. A filter, regulator and lubricator arrive pre-plumbed on a single L-shape bracket with quick mounting clamps, eliminating inter-unit tubing. This model features a 3/8in port, a 5 um element and operates at 0.15-0.4 MPa (20-58 psi).
Air passes through the filter first, then the regulator, with oil mist added last so the regulator seat never fouls. The 2390 g assembly needs a proper panel or frame mount rather than tubing support. A circular gauge is fitted, reading MPa/psi for the default NPT thread, while the reverse-flow (reflux) valve is included as a separate pneumatic symbol detailed in the catalogue.
| Model | Airtac GAC F.R.L. Unit GAC40010LWTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds instrument air to sensitive solenoid valve banks using the 5 um element to prevent sticking, while holding a steady low-pressure output.
Supplies gentle, regulated air to thin-walled gripping cylinders on form-fill-seal equipment, preventing crushing via the 0.15-0.4 MPa range.
Conditions air for benchtop test fixtures requiring fine filtration and stable low pressure, mounted securely to a frame via the quick clamps.
Choose this lower-pressure type for machines operating strictly within 0.15-0.4 MPa, as it cannot supply higher settings. The 5 um element traps far finer particles than the standard 40 um grade, suiting precision valves at the cost of more frequent element service. Condensate is managed by a semi-auto and manual drain pair, and the PC bowl suits standard -5 to 70 C environments. If the line must stay oil-free, omit the lubricator and choose a filter-regulator instead. Spares are GAF400-10, GAR400-10 and GAL400-10. The catalogue flow curve for the GAC400 is plotted to 6000 L/min at 0.7 MPa inlet, exactly double the GAC300's 3000 L/min envelope, giving clear sizing headroom. Choosing the L type means 0.4 MPa is 44% of the standard 0.9 MPa ceiling.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 2390 g, has a 100 cc drain bowl, a 185 cc oil bowl, and uses ISO VG 32 lubricant.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with details on its own page. This model also includes a circular gauge reading MPa/psi for the NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.