
The AirTAC GAC F.R.L. Unit GAC40010SNT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, the AirTAC GAC40010SNT is a three-unit F.R.L. combination pre-plumbed on a single L-shape bracket with quick mounting clamps. This assembly processes air through a 40 um filter, a pressure regulator and a lubricator in that exact sequence, ensuring oil mist is introduced downstream of the regulator seat to prevent fouling. Equipped with a 3/8in port, it operates within the 0.15-0.9 MPa (20-130 psi) standard range.
Weighing 2390 g, this body size requires a firm panel or frame mount rather than support from the tubing alone. The unit pairs a 100 cc condensate bowl with a 185 cc oil reservoir, establishing the maintenance interval before an operator must attend to the machine. Because the code specifies no gauge, the set pressure cannot be read without adding one to the 1/4in gauge connection. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40010SNT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds main air headers for multi-station assembly machinery where a steady 3/8in supply and substantial flow are required.
Prepares air for continuous packaging equipment, utilizing the 100 cc drain bowl to handle moisture from high cycle rates.
Conditions air for pneumatic diverters and stops on material handling lines, relying on the 185 cc oil bowl for extended run times.
This model uses a PC bowl and ships with both a semi-auto drain, which dumps condensate on every pressure drop, and a manual drain for on-demand emptying. If the machine requires oil-free air downstream, the lubricator must be omitted entirely and a separate filter-regulator chosen instead. Should a finer 5 um element be needed for precision valves, the W option is available, and the three constituent parts are separately orderable as GAF400-10, GAR400-10 and GAL400-10. Stepping down to the GAC300 reduces the plotted flow envelope from 6000 L/min to 3000 L/min at 0.7 MPa inlet. The 1.5 MPa proof pressure provides a 1.5x burst-test margin over the 1.0 MPa maximum, which is a safety rating rather than permission to operate above the limit.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
The standard type operates at 0.15-0.9 MPa (20-130 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It functions in -5 to 70 C temperatures, uses a 100 cc drain bowl, a 185 cc oil bowl, weighs 2390 g, and requires ISO VG 32 lubricant.
The N in the GAC40010SNT code means no gauge is supplied. The body features a 1/4in gauge connection, so a circular gauge reading MPa/psi for the default NPT thread can be added later if the operator needs to visually verify the set pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.