
The AirTAC GAC F.R.L. Unit GAC40010SNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatic setups, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a standard pressure range of 0.15-0.9 MPa (20-130 psi) and a 40 um element. Because the lubricator sits last in the sequence, oil mist is introduced downstream of the regulator seat, preventing fouling during pressure modulation.
Weighing 2390 g, the unit requires a firm panel or frame mount rather than tubing support. It features a PC bowl and carries a reverse-flow (reflux) valve, which the catalogue illustrates as a separate pneumatic symbol. No gauge is supplied, but a 1/4in gauge connection allows operators to add instrumentation for verifying the set pressure. Order code GAC40010SNTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40010SNTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds multiple pneumatic clamps and presses on an automated assembly carriage where consistent 3/8in airflow and downstream oil mist protect sliding actuators.
Conditions air for continuous-motion packaging equipment, using the 100 cc condensate bowl to handle moisture from high-cycle pneumatic folding arms.
Supplies regulated air to high-speed diverter gates on parcel conveyor lines, relying on the 40 um filter to prevent valve blockages from line debris.
This assembly uses a semi-auto and manual drain pair, emptying condensate on pressure drops or on demand into the 100 cc bowl. If a machine requires oil-free air downstream, omit the lubricator and choose a dedicated filter-regulator instead. The three constituent units are separately orderable as GAF400-10, GAR400-10 and GAL400-10, meaning a damaged bowl does not require replacing the whole assembly. Stepping down to the GAC300 drops the plotted flow envelope from 6000 L/min to 3000 L/min at 0.7 MPa inlet, halving the available capacity. With a 1.5 MPa (215 psi) proof test against the 1.0 MPa (145 psi) maximum, this body provides a 1.5x burst margin.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It handles temperatures from -5 to 70 C, uses a 40 um element, and weighs 2390 g. The drain bowl holds 100 cc and the oil bowl holds 185 cc, requiring ISO VG 32 or equivalent lubricant.
The N in the product code indicates no gauge is supplied. The body features a 1/4in gauge connection, allowing you to install a compatible pressure instrument separately to monitor the 0.15-0.9 MPa operating range.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.