
The AirTAC GAC F.R.L. Unit GAC40010SNWT is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for demanding pneumatics, this AirTAC GAC40010SNWT assembly integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a 5 um element to trap fine particles before they reach sensitive valves. Standard type regulation provides a 0.15-0.9 MPa (20-130 psi) operating band, while the PC bowl configuration keeps the 2390 g unit compact.
Air passes through the filter first, then the regulator, with oil mist injected downstream so the regulator seat stays clean. This specific code omits the pressure gauge entirely, leaving the 1/4in gauge port open for a user-supplied instrument. Condensate is managed by a semi-auto and manual drain pair, requiring an operator to attend the 100 cc drain bowl during pressure drops or maintenance rounds. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC40010SNWT |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds finely filtered 5 um air to precision machining centers where microscopic grit would damage high-speed pneumatic tool changers.
Conditions air for continuous packaging lines, ensuring consistent actuator speed and lubrication for high-cycle sealing jaws.
Supplies regulated, lubricated air to multi-station assembly machinery, protecting moving parts from wear in high-duty cycles.
Choose this 3/8in body when a 5 um element is required for precision pneumatic circuits, stepping up from the GAC300 which offers a 3000 L/min flow envelope compared to this unit's 6000 L/min plotted curve at 0.7 MPa inlet. The PC bowl is standard, but buyers should verify chemical compatibility for aggressive environments. Because the lubricator adds oil mist downstream, select a separate filter-regulator if the application requires strictly dry, oil-free air. Replacement spares share the 400-10 suffix: GAF400-10, GAR400-10 and GAL400-10. Stepping up from the GAC300 gives roughly double the flow envelope, but note the 1.5x overpressure margin: the 1.5 MPa proof pressure is strictly a burst-test boundary against the 1.0 MPa maximum, not permission to run higher.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, uses a 100 cc drain bowl and a 185 cc oil bowl, weighs 2390 g, and requires ISO VG 32 lubricant.
The N in the ordering code indicates no gauge is supplied. The body features a 1/4in gauge connection, allowing operators to install a specific NPT-thread gauge reading in MPa/psi that matches their local monitoring preferences.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.