
The AirTAC GAC F.R.L. Unit GAC40010ST is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air, the GAC40010ST is a complete F.R.L. combination pairing a filter, regulator and lubricator on a single L-shape bracket. This 3/8in ported unit operates within a 0.15-0.9 MPa (20-130 psi) standard pressure range and uses a 40 um element. The 2390 g assembly incorporates quick mounting clamps, eliminating inter-unit tubing and simplifying the installation onto a machine frame.
Air passes through the filter, regulator and lubricator in that specific order, ensuring oil mist is added downstream of the regulator seat to prevent fouling. The PC bowl configuration includes both a semi-auto and a manual drain, while the fitted circular gauge reads in MPa and psi for the default NPT thread. If the downstream line requires air without oil mist, the lubricator must be omitted entirely and a separate filter-regulator used instead.
| Model | Airtac GAC F.R.L. Unit GAC40010ST |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds pneumatic grippers and sealing jaws on high-speed packaging lines where consistent pressure and oil mist protect moving actuators.
Conditions the main air supply for multi-station assembly cells, using the 100 cc drain bowl to handle moisture from continuous daily operation.
Supplies regulated, lubricated air to the pneumatic clutches and brakes on small to mid-sized mechanical presses.
This 3/8in model carries a 100 cc condensate bowl and a 185 cc oil reservoir, dictating the maintenance frequency for the operator. The semi-auto drain dumps condensate on every pressure drop, whereas the manual option allows on-demand emptying. Should a finer 5 um element be required for precision valves, the W option is available, though it demands more frequent element servicing. The three constituent units are separately orderable as GAF400-10, GAR400-10 and GAL400-10, so a damaged bowl does not require replacing the whole assembly. Stepping up to the GAC500 body increases the plotted flow envelope from 6000 L/min to 7000 L/min at 0.7 MPa inlet, representing roughly a 17% increase in capacity. The 1.5 MPa (215 psi) proof pressure provides a 1.5x burst-test margin above the 1.0 MPa (145 psi) maximum operating limit, but this is not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type unit regulates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 2390 g, features a 100 cc drain bowl, a 185 cc oil bowl, and uses ISO VG 32 lubricant.
The unit is fitted with both a semi-automatic and a manual drain, allowing condensate removal on pressure drops or on demand. A circular gauge is installed, reading in MPa and psi to match the default NPT thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.