
The AirTAC GAC F.R.L. Unit GAC40010STK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatics, the AirTAC GAC40010STK is a complete F.R.L. combination pairing a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port serves a 0.15-0.9 MPa (20-130 psi) standard pressure range, protected by a 40 um element. A circular gauge is fitted, reading MPa/psi for the default NPT thread, so operators can verify the setpoint at a glance.
Weighing 2390 g, this body pairs a 100 cc condensate bowl with a 185 cc oil reservoir to stretch maintenance intervals. The unit ships with both semi-auto and manual drains fitted, while the reverse-flow (reflux) valve is included and shown as a separate pneumatic symbol in the catalogue. Oil mist is introduced downstream of the regulator, keeping the pressure seat clean; choose a filter-regulator instead if the line must stay oil-free.
| Model | Airtac GAC F.R.L. Unit GAC40010STK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds a multi-station assembly machine where the 3/8in port and 6000 L/min flow envelope supply several parallel actuators with steady, lubricated air.
Conditions air for continuous motion packers, relying on the 100 cc drain bowl to capture moisture during long production runs.
Protects pneumatic clutches and brakes on material handling conveyors by adding a controlled oil mist downstream of the regulator.
This assembly uses a PC bowl and a 40 um element, making it the standard choice for general factory air. If your machine feeds precision valves or instrument air, step up to the 5 um element variant. The semi-auto and manual drain pair requires an operator to cycle the system or press the valve, whereas the automatic drain option clears condensate independently. Should you need to service this unit, the replacement parts are GAF400-10, GAR400-10 and GAL400-10. Stepping down to the GAC300 body drops the plotted flow envelope from 6000 L/min to 3000 L/min at 0.7 MPa inlet, halving the available capacity. Finally, the 1.5 MPa proof pressure against the 1.0 MPa maximum provides a 1.5x burst-test margin, not permission to run above 1.0 MPa.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This standard type operates at 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. It features a 100 cc drain bowl, a 185 cc oil bowl, and weighs 2390 g.
The K indicates that a reverse-flow (reflux) valve is fitted. The catalogue depicts this as a distinct pneumatic symbol with details on its own page. This model also retains the default semi-auto and manual drain configuration rather than the automatic drain option.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.