
The AirTAC GAC F.R.L. Unit GAC400C10ALNTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air for mid-size pneumatic setups, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in port pairs with a metal bowl and a 40 um element, while the lower-pressure type restricts the operating range to 0.15-0.4 MPa (20-58 psi). An automatic drain clears condensate without an operator, and a reverse-flow valve is fitted.
Air passes through the filter, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls. Weighing 2390 g, the assembly relies on a solid panel mount rather than tubing support. The 100 cc condensate bowl and 185 cc oil reservoir dictate the maintenance interval, and the missing gauge leaves a 1/4in connection for adding one if needed. Order code GAC400C10ALNTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC400C10ALNTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC400 is 1/4" if you add one.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/4" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds low-pressure air to loom actuators where precise tensioning is required and higher pressures would damage delicate fibers.
Provides steady 0.4 MPa air to folding and gluing cylinders, with the automatic drain handling condensate during continuous shifts.
Conditions air for sensitive pneumatic dispensers, utilizing the metal bowl for solvent resistance in chemical processing environments.
Choose this assembly for 3/8in lines requiring low-pressure control between 0.15-0.4 MPa (20-58 psi). The metal bowl suits harsher industrial environments compared to standard PC or nylon options, and the 40 um element handles general plant air. Because no gauge is supplied, the set pressure cannot be read without adding one to the 1/4in gauge connection. If the downstream line must remain oil-free, omit the lubricator and choose a filter-regulator instead. Replacement spares follow the body-port suffix: GAF400-10, GAR400-10 and GAL400-10. Stepping up to the GAC500 body increases the flow envelope from 6000 to 7000 L/min at 0.7 MPa inlet, but the L-type ceiling of 0.4 MPa is 44% of the standard 0.9 MPa maximum, so verify your machine will never need more pressure.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. It features a 100 cc drain bowl, a 185 cc oil bowl, a 40 um element, and weighs 2390 g. The recommended lubricant is ISO VG 32.
The K indicates a reverse-flow (reflux) valve is fitted. The catalogue shows this as a separate pneumatic symbol with details on its own page. Additionally, the N after the port means no gauge is supplied out of the box.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.