
The AirTAC GAC F.R.L. Unit GAC400C10ALTK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 3/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
Delivering cleaned, regulated and lubricated air, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 3/8in ported GAC400 body carries a 40 um element and operates within the lower 0.15-0.4 MPa (20-58 psi) pressure band. A metal bowl houses the assembly, and the automatic drain actively clears condensate without operator input.
Air routes through the filter first, then the regulator, before oil mist is introduced downstream by the lubricator so the regulator seat stays clean. Weighing 2390 g, the unit also includes a reverse-flow (reflux) valve, shown as a separate pneumatic symbol in the catalogue. A circular gauge reading MPa/psi is fitted to monitor the set pressure. Order code GAC400C10ALTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac GAC F.R.L. Unit GAC400C10ALTK |
|---|---|
| Series | GAC400 F.R.L. combination |
| Port size | 3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Capacity of oil bowl | 185 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 2390 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in psi / bar, set by the NPT thread code.
| GAC400 | GA400 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 10 | Port size 3/8". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| T | NPT thread; gauge scale psi / bar. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF400-10 filter, GAR400-10 regulator, GAL400-10 lubricator — all three share this body and port.
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC400 · 3/8" · curve to 6000 L/min |
|---|---|
| One size down | GAC300 |
| One size up | GAC500 (curve to 7000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Feeds 3/8in lines to clamping fixtures requiring delicate, regulated pressure below 0.4 MPa to avoid damaging fragile components.
Conditions air for flow wrappers and sealing jaws, adding oil mist downstream to protect moving jaws from wear.
Supplies stable, lubricated air to low-pressure actuators on test rigs, relying on the automatic drain for continuous unattended operation.
Choose this metal-bowl unit for unattended lines where the automatic drain prevents condensate buildup in the 100 cc drain bowl. The lower-pressure type caps at 0.4 MPa, making it unsuitable if the machine might ever require higher actuation force. If the application requires completely oil-free output downstream, omit the lubricator and select a dedicated filter-regulator instead. Replacement spares share the 400-10 suffix: GAF400-10, GAR400-10 and GAL400-10. Stepping up to the GAC500 doubles the plotted flow envelope to 7000 L/min at 0.7 MPa inlet compared to this body's 6000 L/min curve, but the 0.4 MPa ceiling is 44% of the standard 0.9 MPa maximum.
Quick checklist
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
It operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C. The drain bowl holds 100 cc and the oil bowl holds 185 cc. It weighs 2390 g and uses ISO VG 32 lubricant.
The K signifies that a reverse-flow (reflux) valve is fitted. The catalogue displays this as a distinct pneumatic symbol, and you should consult its dedicated page for specific functional details.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.